Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
C . Battery fully charged When the batter y has been fully charged, the green light will star t blinking. A fully charged shaver has a cordless shaving time of up to 30 minutes. . Battery running low If the batter y is running low, the red light star ts blinking. Charging Recharge and keep the appliance at a temperature between 5cC and 35cC. The appliance is suitable for mains voltages ranging from 100 to 240V. You can also shave without charging by connecting the shaver to the mains. Do not leave the shaver connected to the mains continuously. ENGLISH C C C 1 2 Put the appliance plug into the shaver. Put the mains plug into the socket. Do not recharge the shaver in a closed pouch. 3 When charging for the first time and after a long period of disuse: leave the shaver to charge for 4 hours. Charging normally takes approx. 1 hour. 4 Remove the mains plug from the socket and disconnect the appliance plug from the shaver when the battery has been fully charged. Shaving 1 2 Switch the appliance on by sliding the on/off button upwards. Move the shaving heads quickly over the skin, making both straight and circular movements. Shaving on a dr y face gives the best results. Your skin may need 2-3 weeks to get accustomed to the Philishave system. 3 4 Switch the appliance off. Put the protective cap on the shaver to prevent damage. Replace the shaving heads (type HQ4 Micro Action) ever y 2 years for optimal shaving results. C C 6 ENGLISH Trimmer For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide upwards. The trimmer can be activated while the motor is running. Cleaning . Regular cleaning guarantees better shaving performance. C . For easy and optimal cleaning, the Philishave Action Clean (shaving head cleaner, type HQ 100) is available. Ask your Philishave dealer or retailer for information. You can also clean the shaver in the following way: Shaving unit Clean the shaving unit ever y week. 1 2 Switch the appliance off, remove the mains plug from the socket and disconnect the appliance plug from the shaver. Clean the top of the appliance first, using the brush supplied. ENGLISH 3 Remove the shaving unit. C 4 5 Clean the inside of the shaving unit and the hair chamber with the brush. Put the shaving unit back onto the shaver. Shaving heads C 2 1 Switch the appliance off, remove the mains plug from the socket and disconnect the appliance plug from the shaver. C Remove the shaving unit from the shaver. C Turn the wheel anticlockwise and remove the retaining frame. Clean the shaving heads ever y two months. 1 2 3 4 Remove and clean the shaving heads (cutters and guards) one by one. C Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal ENGLISH C C C 2 1 performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the brush. Brush carefully ...
Эта инструкция также подходит к моделям:Электробритвы - HQ4856/33 (715.75 kb)
Электробритвы - HQ4856/88 (715.75 kb)