Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель HQ40/35

Производитель: Philips
Размер: 566.33 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Inserting batteries The appliance runs on two R6 AA 1.5-volt batteries. Preferably use Philips alkaline batteries. Make sure that your hands are dry when inserting the batteries. 1 2 Remove the lid of the battery compartment (Fig. 2) Place two batteries in the battery compartment (Fig. 3). Make sure the + and - indications on the batteries match the indications in the batter y compar tment. The shaver does not work if the batteries have been placed incorrectly. 3 Put the lid of the battery compartment back onto the appliance. First insert the top part of the lid (1) and then press the bottom part down until you hear a click (2) (Fig. 4). To avoid damage due to battery leakage: , -do not expose the appliance to temperatures higher than 35 C; c -remove the batteries if the appliance is not going to be used for a month or more; -do not leave empty batteries in the appliance. Cordless shaving time Two new batteries offer a cordless shaving time of 60 minutes. Using the appliance Shaving 1 Switch on the shaver by pressing the switch lock and pushing the on/off slideupwards (Fig. 5). The switch lock prevents accidental switching on of the appliance. 2 Move the shaving heads quickly over your skin, making both straight and circular movements (Fig. 6). Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 4 Switch off the shaver by pushing the on/off slide downwards. Put the protection cap on the shaver every time you have used it, to prevent damage (Fig. 7). Cleaning and maintenance Regular cleaning guarantees better shaving performance. For easy and optimal cleaning, the Philips , Action Clean (shaving head cleaner, type HQ100) is available. Ask your Philips dealer for information (Fig. 8). Note:The Philips Action Clean may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 2 3 4 5 Switch off the shaver. Clean the top of the appliance first, using the brush supplied (Fig. 9). Press the release button (1) and remove the shaving unit (2) (Fig. 10). Clean the inside of the shaving unit and the hair chamber with the brush (Fig. 11). Put the shaving unit back onto the shaver. Every two months: shaving heads 1 2 3 Switch off the shaver. Press the release button (1) and remove the shaving unit (2) (Fig. 10). Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2) (Fig. 12). 4 Slide the shaving heads out of the retaining frame and clean them one by one (Fig. 13). Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the brush (Fig. 14). Brush carefully in the direction of the arrow. 6 7 8 Brush the guard (Fig. 15). Slide the shaving heads back into the retaining frame and put the retaining frame back into the shaving unit (Fi...

Эта инструкция также подходит к моделям:
Электробритвы - HQ40/18 (566.33 kb)
Электробритвы - HQ41/15 (566.33 kb)
Электробритвы - HQ40 (566.33 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории