Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Charging normally takes approx. 8 hours. When the shaver is fully charged, it has a shaving time of up to 30 minutes. For optimal performance, only charge the shaver when the battery is low. Do not leave the appliance connected to the mains for more than 16 hours. Charge indications Charging -When the shaver is charging, the charging light lights up green continuously (Fig. 4). Battery low -HQ914: the charging light lights up orange continuously. -HQ912: the motor stops or star ts running slower. Charging the appliance Charge the appliance when the charging light lights up orange (HQ914) or when the motor stops or star ts running slower (HQ912). 1 2 Put the appliance plug in the shaver (Fig. 5). Put the adapter in the wall socket. The charging light goes on to indicate that the , appliance is charging (Fig. 4). Note: Charge the shaver for at least 8 hours but not more than 16 hours. 3 Remove the adapter from the wall socket and pull the appliance plug out of the shaver when the battery is fully charged. Using the appliance The shaver cannot be used directly from the mains. 1 Remove the protection cap. 2 3 Press the on/off button to switch on the shaver (Fig. 6). Move the shaving heads over your skin. Make both straight and circular movements (Fig. 7). Note: Shaving on a dry face gives the best results. Note:Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 4 5 6 When you have finished shaving, press the on/off button again to switch off the appliance. Clean the shaver after every use (see chapter ‘Cleaning’). Put the protection cap on the shaver to prevent damage to the shaving heads (Fig. 8). Note: Make sure that the lug of the protection cap covers the release button. Cleaning Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Be careful with hot water. Always check if the water is not too hot, to avoid burning your hands. Regular cleaning guarantees better shaving performance. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water ever y time you have used the appliance. After every use: shaving unit and hair chamber 1 2 3 4 5 6 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Rinse the outside of the shaving unit under a hot tap for some time (Fig. 9). Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver (2). (Fig. 10) Rinse the inside of the shaving unit under a hot tap for some time (Fig. 11). Rinse the hair chamber under a hot tap for some time (Fig. 12). Put the shaving unit back onto the shaver (Fig. 13). Every two months: shaving heads Note: Do not use cleaning agents or alcohol to clean the shaving heads. Only use HQ110 Shaving Head Cleaning Spray. 1 2 3 4 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Press the release button and pull the shaving unit off the shaver (Fig. 10). Turn the orange wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 14). Remove the shaving heads from the shaving unit one by one (Fig. 15). Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. Remove the guard from the cutter (Fig. 16). Clean the cutter with the short-bristled side of the brush. Brush carefully in the direction of the arrows (Fig. 17). Clean the guard with the brush (Fig. 18). Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the orange wheel clockwise. 5 6 7 8 9 10 Put the shaving unit back onto the shaver. Storage -Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. 8). Note: Make sure that the lug of the protection cap covers the release button. Replacement Replace the shaving heads ever y two years for optimal shaving results. Replace damaged or worn shaving heads with Philips HQ55 shaving heads. For instructions on how to remove the shaving heads, see section ‘Ever y two months: shaving heads’ in chapter ‘Cleaning’. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 19). -The built-in rechargeable batter y contains substances that may pollute the environment. Remove the batter y before you discard and hand in the appliance at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips ser vice centre.The staff of this centre will remove the battery for you and will dispose of it in an environmentall...