Оценок - , средний балл:
(
)
)
Производитель: Philips
Размер: 4.09 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. charging Make sure the appliance is switched off before you star t to charge it. Charging takes approx. 8 hours. You can also shave without charging by connecting the shaver to the mains. Charge indications chargingWhen you start charging the empty shaver, the charging light goes on. Battery fully chargedWhen the battery is fully charged, the charging light starts to flash. When you unplug the shaver, the charging light goes out. , , 6 EnglisH Using the appliance Shaving Press the on/off button once to switch on the shaver. The power-on lights go on to indicate that the motor is running. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. Press the on/off button once to switch off the shaver. The power-on lights go out. Clean the shaver (see chapter ‘Cleaning and maintenance’). -- Cordless shaving time After charging, the shaver has a cordless shaving time of up to 35 minutes. charging the appliance Charge the appliance when the motor stops or star ts running slower. 1 Put the appliance plug in the shaver. 2 Put the powerplug in the wall socket. 3 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged. 1 2 3 4 EnglisH 5 Put the protection cap on the shaver every time you have used it, to prevent damage to the shaving heads. trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide downwards. The trimmer can be activated while the motor is running. 2 Close the trimmer (‘click’). Cleaning and maintenance Regular cleaning guarantees better shaving performance. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Note:Water may leak from the socket at the bottom of the appliance when you rinse it.This is normal and not dangerous. Every day: shaving unit and hair chamber 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving unit. 3 Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. Make sure you clean the inside as well as the outside of the shaving unit. 4 Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 5 Open the shaving unit again and leave it open to let the appliance dry completely. You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit, turn the lock anticlockwise (1) and remove the retaining frame (2). , English 2 Clean the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 3 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. 4 Close the shaving unit. Trimmer Clean the trimmer every time you have used it. 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Clean the trimmer with the brush supplied. 3 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Storage Put the protection cap on the shaver to prevent damage to the shaving heads. , English 10 EnglisH replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ8 Philips shaving heads only. Note: Do not mix up the cutters and the guards to guarantee optimal shaving performance. 1 Switch off the shaver, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button to open the shaving unit. 3 Turn the lock anticlockwise (1) and remove the retaining frame (2). 4 Remove the shaving heads and place new ones in the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. Make sure that the projections of the shaving heads fit exactly into the recesses. 5 Close the shaving unit. AccessoriesThe following accessories are available: HQ8500/HQ8000 powerplug. HQ8 Philips Shaving Heads. HQ110 Philips Shaving Head Cleaning Spray. HQ8010 car cord. , ---- EnglisH 11 Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment. Disposal of the battery The built-in rechargeable NiMH batter y contains substances...
Эта инструкция также подходит к моделям:Электробритвы - HQ7260/16 (4.09 mb)