Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. Regular cleaning guarantees better shaving results. . Do not immerse razor in water. 1 2 3 Always turn razor OFF, unplug from outlet and remove cord from razor or charging stand before cleaning. Press the Razor Head Release Button, flip open the Razor Head Assembly. Clean inside razor heads and hair chamber by running under hot water. 24 ENGLISH ENGLISH 25 C 3 Turn the wheel counterclockwise (1) and remove the retaining frame (2). C 4 Remove and clean one set of cutters and combs at a time. C 5 Separate the cutter from the comb and rinse clean under hot water. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. C 6 Replace the set back into the Razor Head Assembly so that the ‘wings’ on the comb fit within the brackets located towards the center of the Assembly. The set will only fit into the Razor Head Assembly if the ‘wings’ are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses. 7 Repeat the process for the other two sets of cutters and combs. 8 Replace the frame. C 4 Clean outside of Razor Head Assembly by running under hot water. 5 Close the Razor Head Assembly and shake off excess water. C 6 Open Razor Head assembly again and leave open to air dry. NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads. C 7 If the shaving unit becomes detached from the razor, you can easily reattach it. 8 You may also clean the hair chamber without water by using the supplied brush. Once A Month: Razor Heads Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored. 1 Turn razor OFF, remove the charging plug from the outlet and cord from the razor or charging stand. C 2 Press the razor head release button to open the razor head assembly. 26 ENGLISH C C C Press down (1) and turn wheel clockwise (2) until it locks into place. Close the Razor Head Assembly. 9 10 Once A Month: Razor Heads For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and lubricated with Philips Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. After Each Use: Trimmer Turn razor OFF. Push down spring-release trimmer switch. Clean trimmer with the brush every time you use it. Lubricate the trimmer teeth with Philips Norelco Razor Lubricant (model AL80) or with one drop of mineral oil every 6 months. 5 Close trimmer by pressing trimmer down. 1 2 3 4 This razor has no other user-serviceable parts. Any other service should be performed by the Philips Norelco Service Location. ENGLISH 27 Replacing the razor heads . Replace the razor heads once a year for optimal shaving results. . Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only. Razor head check indication . The replacement head indicator symbol starts blinking to remind you to check if it’s time to replace your razor heads to obtain optimal shaving results. Storage C . The razor can be placed in the charging stand for safe storage. If storing razor in stand, remove the plug from outlet as soon as the razor is fully charged. . Be sure razor is turned off. Remove cord from outlet and razor or charging stand before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. . Do not wrap cord around razor or charging stand when storing. . Store cord in a safe location where it will not be cut or damaged. . Do not keep razor or charging stand permanently plugged into outlet. . Do not place or store razor or charging stand where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. C . Put the Protective Razor Head Cap on razor to protect heads. 28 ENGLISH C . Press the ON/OFF button for 3 seconds. Travel Lock If you are going to travel, it is possible to lock the razor. The travel lock prevents the razor from being switched on by accident. Activating the travel lock The razor is switched OFF and the key symbol rotates once. The travel lock is now activated. Deactivating the travel lock . Press the ON/OFF button for 3 seconds. The razor turns ON to indicate that the razor has been unlocked. The razor is now ready for use. Assistance . For assistance, call toll free: 1-800-243-3050 or visit our website: . Information is available 24 hours a day, 7 days a week. ENGLISH 29 Accessories . Replacement Heads Model HQ9 - For maximum razor performance, replace your Philips Norelco razor heads once a year or as soon as the replacement head symbol star ts blinking. . Razor Cleaner RC1776 - Philips Norelco Razor Cleaner. . Razor Lubricant AL80 - Philip...