Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель HQ9020/16

Производитель: Philips
Размер: 994.57 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Clean the shaver after every shave to guarantee better shaving performance. For the best cleaning result, we advise you to use Philips Cleaning Spray (HQ110). Ask your Philips dealer for information. Note: Philips Shaving Head Cleaning Spray (HQ110) may not be available in all countries. Contact the Consumer Care Centre in your country about the availability of this accessory. After every shave: shaving unit and hair chamber Never rinse the shaver when the battery compartment is open. Always make sure the battery compartment cover is properly attached before you start rinsing the shaver. Be careful with hot water. Always check if the water is not too hot, to avoid burning your hands. 1 2 3 4 5 6 Switch off the shaver. Rinse the outside of the shaving unit under a hot tap for some time (Fig. 10). Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver (2) (Fig. 11). Rinse the inside of the shaving unit under a hot tap for some time (Fig. 12). Rinse the hair chamber under a hot tap for some time (Fig. 13). Put the shaving unit back onto the shaver (Fig. 14). Every two months: shaving heads Note: Do not use cleaning agents or alcohol to clean the shaving heads. Only use Philips Cleaning Spray (HQ110). Switch off the shaver. 2 3 4 Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver (2) (Fig. 11). Turn the orange wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 15). Remove and clean one shaving head at a time. Each shaving head consists of a cutter and a guard (Fig. 16). Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. Remove the guard from the cutter (Fig. 17). Clean the cutter with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrows (Fig. 18). Clean the guard with the long-bristled side of the cleaning brush (Fig. 19). Put the cutter back into the guard after cleaning (Fig. 20). Put the shaving heads back into the shaving unit (Fig. 21). 5 6 7 8 9 10 Put the retaining frame back into the shaving unit (1)and turn the orange wheel clockwise (2) (Fig. 22). 11 Put the shaving unit back onto the shaver (Fig. 14). storage Store the appliance in a dry place. Store the appliance at a temperature between 5°C and 35°C. 1 2 Switch off the shaver. Put the protection cap on the shaver after use to prevent damage and to avoid dirt accumulation in the shaving heads (Fig. 9). Note: Make sure that the lug of the protection cap covers the release button. Replacement Replace the shaving heads ever y two years for optimal shaving results. Replace damaged or worn shaving heads with Philips HQ56 shaving heads only. For instructions on how to remove the shaving heads, see chapter ‘Cleaning and maintenance, section ‘Ever y two months: shaving heads’. Accessories To retain the top performance of your shaver, make sure you clean it regularly and replace its shaving heads at the recommended time. shaving heads -We advise you to replace your shaving heads every two years. Always replace them with Philips HQ56 shaving heads only (Fig. 23). Cleaning -Use Philips Cleaning Spray (HQ110) to clean the shaving heads thoroughly. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 24). -Batteries contain substances that may pollute the environment. Do not throw away empty batteries with the normal household waste, but dispose of them at an official collection point for batteries. Always remove the batteries before you discard and hand in the appliance at an official collection point (Fig. 25). guarantee and service If you need ser vice or information or if you have a problem, please visit the Philips website at com or contact the Philips Consumer Care Centre in your country.You find its phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country, go to your local Philips dealer. guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. Problem Possible cause Solution The shaver The shaving Clean the shaving does not heads are dir ty. heads thoroughly shave as You have not before you continue well as it cleaned the shaving. See chapter used to. shaver wel...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории