Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
7). The trimmer is not required for long hairs in the neck area; these hairs can easily be shaved off with the shaving unit. • After each use: switch off and clean the trimmer using the brush. Every six months: apply two drops of light machine oil to the teeth of the trimmer (fig. 8). Cleaning • Switch off before cleaning. • Handle the shaving heads carefully to avoid causing damage. • Regular cleaning and maintenance ensures optimal performance and prolongs the shaver’s working life. once per week: shaving slots and hair chamber. (See fig. 9-12.) -Use the short bristled brush to clean the shaving head slots (fig. 10). -To remove the shaving unit depress the retaining button (1) and lift the shaving unit from the shaver (2) (fig. 10). 5 -Remove hairs from the chamber and shaving unit using the long bristled brush (fig. 11 and 12). once per 3 months: shaving slots, hair chamber and shaving unit (guards and cutters). (With oily skin or when using pre-shave lotion: once per month) • First follow the directions corresponding to fig. 9-12. Then proceed with the directions corresponding to fig. 13-22. -Release (1) and remove the holder (2) from the shaving unit (fig. 13). -Slide one shaving head (guard and cutter) from the holder (fig. 14). Remove only one shaving head (guard and cutter) at a time for cleaning to ensure that the cutters and guards do not become mixed. Each cutter has been ground together with the guard. If the guards and cutters are mixed, it may take some weeks before optimal shaving performance is restored. If the shaving performance has become noticeably less after cleaning, change only the cutters over. -Clean the cutter by brushing only in the direction of the arrow using the short bristled brush (fig. 16). -If you have a very dry skin, or if degreasing liquid (e.g. alcohol) has been used to clean the shaving heads, lubricate them with one drop of light machine oil (fig. 18 and 22). As an alternative to using light machine oil for lubrication you may use the specially formulated Philishave cleaner/lubricant type 389 SHC/1 available from authorised Philips dealers and Philips Service Centres. 6 Replacement shaving heads Use only Philishave replacement heads type HQ 4 when replacing worn or damaged shaving heads. 7 Francais Important • Depliez page 3 et les pages 32 et 33 con- tenant les illustrations. • Evitez tout contact de l’appareil avec l’eau (fig. 1). • Ne laissez pas l’appareil expose a de fortes chaleurs ou aux rayons directs du soleil (fig. 2). • Votre peau devra s’habituer au systeme Philishave pendant une periode de deux a quatre semaines. Marche/arret -Enfoncez bien la fiche dans le connecteur jusqu’au repere (fig. 3). Branchez l’appareil. Tensions admises: entre 100 et 240 Volts. (L’appareil s’adapte automatiquement a la tension du reseau.) -Faites coulisser l’interrupteur vers le haut pour mettre l’appareil en marche (fig. 4). -Faites coulisser l’interrupteur vers le bas pour mettre l’appareil a l’arret (fig. 5). Rasa...
Эта инструкция также подходит к моделям:Электробритвы - HQ442/33 (415.7 kb)