Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This could cause fire or an electric shock. Replace it at an authorized service center. • Disconnect the power cord when storing the shaver. Do not bend the power cord or wrap it around the shaver. • The supply cord cannot be replaced. If the cord is damaged, the adaptor should be scrapped. • The adaptor is intended to be correctly oriented in a vertical or floor mount position. Caution • The outer foil is very thin and can be damaged if not used correctly. Check that the foil is not damaged before using the shaver. Do not use the shaver if the foil is damaged as you will cut your skin. • Keep both the inner blades inserted. If only one of the inner blades is inserted, the shaver may be damaged. • If you clean the shaver with water, do not use salt water or hot water. Do not soak the shaver in water for a long period of time. • Clean the housing only with a soft cloth slightly dampened with tap water or soapy tap water. Do not use thinner, benzine, alcohol or other chemicals. • Store the shaver in a place with low humidity after use. • Do not wash the charging stand with water. ES.RF41 • Do not store the shaver where it will be exposed to direct sunlight or other heat sources. • Hold the adaptor when disconnecting it from the household outlet. If you tug on the power cord, you may damage it. • Do not share your shaver with other people. Doing so may result in infection or inflammation. Intended use • This WET/DRY shaver can be used for wet shaving with shaving lather or for dry shaving.You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol means that the hand.held part may be used in a bath or shower. • Treat yourself to wet lather shaves for at least three weeks and notice the difference.Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. • This shaver body has a waterproof performance that is compliant with the “IPX7”, and the adapter has a waterproof performance that is compliant with the “IPX4”. English English Parts identification . . . . . . . . . . ES-RF41 ES-RF31 . . . . . . . . . . . . . English . . A Protective cap B Outer foil section 1 Foil frame 2 System outer foil 3 System outer foil release buttons C Inner blades D Main body 4 Foil frame release buttons 5 Lock ring 6 Battery capacity lamp 7 Charge status lamp 8 Appliance socket 9 Power switch [0/1] : Trimmer ; Trimmer lock button < Trimmer handle E Adaptor (RE7-59) = Power cord . Appliance plug F Travel pouch G Cleaning brush H Charging stand ES.RF41 I Operating Instructions Notes This product is intended for household use only. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. .•• English Using the lock ringUse the lock ring [D5] to lock or unlock the power switch [D9]. 1. Rotate the lock ring [D5] until it clicks. Unlock the power switch: When shaving, washing the shaver, lubricating the shaver. Lock the power switch: When carrying the shaver. ChargeCharging the shaver11Insert the appliance plug [E.] into the shaver. 22Plug in the adaptor [E] into a household outlet. Turn the shaver off before attaching. Charging is completed after approx. 1 hour. • • 21If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. You cannot operate the shaver while charging. • Charging with the charging stand ES.RF411. Insert the appliance plug [E.] into the charging stand [H]. . Place the shaver on the charging stand [H] and plug in the adaptor [E] into a household outlet. Reading lamps when chargingWhile charging ES.RF41ES.RF31The charge status lamp ( ) glows. The level of the battery capacity lamp will increase as charging progresses. Using the lock ringUse the lock ring [D5] to lock or unlock the power switch [D9]. 1. Rotate the lock ring [D5] until it clicks. Unlock the power switch: When shaving, washing the shaver, lubricating the shaver. Lock the power switch: When carrying the shaver. ChargeCharging the shaver11Insert the appliance plug [E.] into the shaver. 22Plug in the adaptor [E] into a household outlet. Turn the shaver off before attaching. Charging is completed after approx. 1 hour. • • 21If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. You cannot operate the shaver while charging. • Charging with the charging stand ES.RF411. Insert the appliance plug [E.] into the charging stand [H]. . Place the shaver on the charging stand [H] and plug in the adaptor [E] into a household outlet. Reading lamps when chargingWhile charging ES.RF41ES.RF31T...