Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
1 Be certain razor is in OFF position. 2 Connect cord (provided) to razor. 3 Plug into any 120V to 240V AC electrical outlet. 4 5 21 Day Trial and Conversion Process. It is a fact that your skin and beard need time to adjust to a new shaving system. Use your new razor exclusively for 3 weeks to fully enjoy the closeness of a Norelco shave.* At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you'll soon experience the full joy of your new razor. * Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Norelco shaving system. If you are still not convinced after 21 days, Norelco will refund you the full purchase price, guaranteed. Turn razor ON. Shave against the direction of beard growth using both straight and circular movements. Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin, so the floating heads can follow the contours of your face. DO NOT press too hard. Too much pressure can pinch the skin into the combs. Turn razor OFF. Put the protective razor head cap on the razor to protect razor heads. Replace your Norelco Micro Action razor heads (model # HQ4 Plus) once a year for optimal shaving results. 6 7 8 TRIMMING To groom sideburns and moustache: Turn razor ON. Push up Trimmer Slide Switch. Hold Trimmer as shown and move in downward strokes with gentle pressure. Close Trimmer by sliding Trimmer switch down. Turn razor OFF. 1 2 3 4 5 CLEANING Once A Week: Razor Turn razor OFF (disconnect cord from razor and outlet). Clean the top of the razor with the supplied brush. 1 2 12 3 Remove Razor Head Assembly off the razor unit. 4 Brush the inside of housing and Razor Head Assembly. 5 Replace the Razor Head Assembly back on razor. Every Two Months: Razor Heads 1 Turn razor OFF and disconnect from outlet. 2 Remove Razor Head Assembly off housing unit. 3 Brush the inside of the housing. 4 Turn Razor Head Assembly over so that the underside is exposed. 5 Press down and turn wheel of frame counterclockwise. 6 Remove the frame and brush clean. 7 Remove and clean one cutter and head at a time. • Be careful not to mix up cutters and heads. They are a matched set and if interchanged, it will greatly affect shaving performance. 7 Remove and clean one cutter and head at a time. • Be careful not to mix up cutters and heads. They are a matched set and if interchanged, it will greatly affect shaving performance. Separate the cutter from the comb. Only brush the cutter in an upward motion. Use the short bristled side of the brush. Brush the slots of the razor head. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). Replace the cutter and razor head in the Head Assembly. Repeat the process for the other two razor heads (cutters and combs). Replace the frame. 8 9 10 11 12 13 14 14 Press down and turn the wheel clockwise until it locks into place. 1 2 3 4 5 15 Replace the Razor Head Assembly back on razor. After Each Use: Trimmer Turn razor OFF. Push Trimmer Slide Switch up to pop-up Trimmer. Clean Trimmer with the brush every time you use it. Lubricate the Trimmer teeth with Norelco Razor Lubricant (model AL80), or with one drop of mineral oil every 6 months. Close Trimmer by sliding Trimmer switch down. ASSISTANCE For assistance or the Authorized Norelco Service Location nearest you, call toll free: 1-800-243-3050 or visit our website: Authorized Norelco Service Location information is available 24 hours a day, 7 days a week. ACCESSORIES Replacement Heads • Model HQ4 Plus - For maximum razor performance, replace your Norelco Micro Action razor heads once a year. Note: Model HQ4 Micro Action Replacement Heads DO NOT fit this razor. Razor Lubricant & Cleaners • RC1776 - Norelco Razor Cleaner. • AL80 - Norelco Razor Lubricant. Norelco Razor Accessories may be purchased at a store near you, an Authorized Norelco Service Location,on our website or by using the order form enclosed. FULL TWO YEAR WARRANTY Philips Electronics North America Corporation warrants each new Norelco Product, Model 5426LC (except cutters and combs) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.* Use of unauthorized replacement parts will void this warranty. PHILIPS ELECTRONICS NORTH AMERICA CORPORATION WILL NOT PAY...