Оценок - 3, средний балл: 3.3 ( )

Производитель: Bosch Размер: 1.22 mb Название файла: 945648EN.pdf Язык инструкции:

At step 4 use the shuttle to over write existing program. You can change the name of a program in the menu ” Edit Programme Name ”. Activating the programme 1. Activate the appliance. 2. Select Favourite Programme menu. Press OK to confirm. 3. Select your favourite programme name. Press OK to confirm. Press to go to Favourite Programme directly. Also from the off state. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. Core temperature sensor Core temperature sensor measures the core temperature of the meat. When the meat reaches set temperature the oven switches off automatically. Using the accessories 19 You have to set: • The oven temperature • The core temperature Use only original parts. It ensures the best cooking result. Using the core temperature sensor: 1. Put the tip of the core temperature sensor into the centre of the meat. 2. Activate the appliance. 3. Put the plug of the core temperature sensor into the socket on the right-upper side of the cavity front. The display shows core temperature sensor. 4. Use shuttle in less than 5 seconds to set the core temperature. 5. Set the oven function and, if necessary, the oven temperature. The appliance calculates an approximate end time. An end time is different for the different quantities of the food, the set oven temperatures (minimum 120°C) and the operating modes. The appliance calculates the end time in approximately 30 minutes. The core temperature sensor must stay in the meat and in the socket during the cooking process. 6. When the meat reaches set core temperature, an acoustic signal sounds. The appliance switches off automatically. Use any key to stop the signal. 7. Remove the core temperature sensor plug from the socket and remove the meat from the oven. To change the core temperature press . WARNING! The core temperature sensor is hot! There is the risk of burns! Be careful when you remove the tip and plug of the core temperature sensor. Inserting the Oven Accessories The deep pan and the wire shelf have side edges. These edges and the shape of the guide-bars causes the anti-tilt safety for the oven accessories. 20 20 Additional functions Inserting the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the shelf positions. ADDITIONAL FUNCTIONS Control Lock The Control Lock prevents an accidental change of the oven function . Activating the Control Lock 1. Activate the appliance. 2. Set the oven function. 3. Press again and again until the display shows Control Lock 4. Press OK to confirm. The Control Lock is active. Deactivating the Control Lock 1. Press . 2. Press OK to confirm. The Control Lock is not active. If you deactivate the appliance, the Control Lock deactivates. Child Lock The Child Lock prevents an accidental operation of the appliance . Activating the Child Lock 1. Activate the appliance. 2. Touch and at the same time at the same time until the display shows a message. Deactivating the Child Lock 1. Press OK key. 2. Touch and at the same time until the display shows a message. SET + GO SET + GO function lets you set an oven function (or programme) and use it later with one press of the sensor field. Helpful hints and tips 21 Activating the function: 1. Activate the appliance. 2. Set the heating function. 3. Press again and again until the display shows Duration . 4. Set the time. 5. Press again and again until the display shows SET + GO . 6. Press OK to confirm. To start SET + GO press any sensor field (except ). The set oven function starts. When the oven function ends, an acoustic signal sounds. When the oven function operates, the function Control Lock is on. You can activate and deactivate the SET + GO function in the Basic Settings menu. Automatic switch-off For safety reasons the appliance deactivates automatically after some time: • if an oven function operates. • if you do not change the oven temperature. Oven temperature Switch-off time 30 °C -120 °C 12.5 h. 120 °C - 200 °C 8.5 h. 200 °C -230 °C 5.5 h. The Automatic switch-off works with all oven functions, except Light , Core Temperature Sensor, Duration , End Time . Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. HELPFUL HINTS AND TIPS Inner side of door In some models on the inner side of the oven door you can find: • the numbers of the shelf levels (selected models) • information about the oven functions, recommended shelf levels and temperatures for typical dishes (selected models). The temperature and baking times in the tables are guidelines only. They depend on the recipes, quality and quantity of the ingredients used. 22 22 Care and cleaning Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylami...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: