Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 About the MICROLAB® Carousel . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 FCC compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Carousel components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Setting up the carousel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Carousel housing assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Index bracket platterkit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 DIP switch setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Connecting cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Carousel platter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Carousel service software . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Writing a method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Carousel commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Using the serial interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Installing portrait stackers and shelves . . . . . . . . . . . . . . . . . .22 Installing landscape stackers . . . . . . . . . . . . . . . . . . . . . . . . . .22 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Contacting Hamilton Company . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 In the United Statesand Canada . . . . . . . . . . . . . . . . . . . . . . .29 Outside the U.S. and Canada . . . . . . . . . . . . . . . . . . . . . . . . .29 In Switzerland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Contents MICROLAB® Carousel User Guide (June 2003) About this guide This user guide is for instructional and reference purposes. It describes the components of the carousel and provides instructions for set up and operation. About the MICROLAB® Carousel The MICROLAB® Carousel (figure 1) is a modular component. The carousel is intended for use with the MICROLAB® SWAP application. Multiple units can be placed around a MICROLAB® SWAP (Swivel Arm Platehandler) to provide additional plate capacity for a MICROLAB® pipetting workstation. The carousel provides an integrated solution for increased volume for plate based sample processing. The carousel works with two platter sizes to address multiple capacity requirements. Various SWAP stacks and shelves can sit atop the carousel, providing storage of plates and plate sized consumables. The carousel can also be used for storage of disposable tips, for some applications and instruments. MICROLAB® Vector software is used to control the carousel. Figure 1: Carousel accessory MICROLAB® Carousel User Guide (June 2003) Safety precautions There are four symbols used in this guide. The “Warning” symbol contains information that must be followed to prevent personal injury to those operating the equipment. The “Important” symbol contains information or instructions that must be followed to prevent damage to equipment or loss of data. The “Note” symbol provides information useful for improving system performance, increasing your understanding of the system, or directing you to supplemental information. The “Procedure” symbol is followed by a set of installation or operational steps. MICROLAB® Carousel User Guide (June 2003) FCC compliance The MICROLAB® Carousel complies with the limits for Class B digital devices by the Federal Communications Commission (FCC). This compliance provides reasonable protection against harmful radio communication interference during instrument installation and operation. The MICROLAB® Carousel generates, uses, and can radiate radio frequency energy. Hamilton Company cannot guarantee the MICROLAB® Carousel against radio or television communication interference. However, if you use the instrument as directed, you can limit potential interference. If the MICROLAB® Carousel causes any radio or television interference, we suggest that you: • Turn the MICROLAB® Carousel off and on to determine whether it is generating the interferen...