Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
2 Installation o General......................................3 >=> Step 1 - Prepare cabinet............................. 4 «=> Step 2 - Prepare cabinet for electrical supply.......... ......5 ■=> Step 3 - Removal of oven & grill doors...................... 5 •=> Step 4 - Connect to electrical supply...................... 6 •=> Step 5 - Secure to cabinet............................ 6 => Step 6 - Before using ..............................7 «=> Step 7 - Testing user functions......................... 7 Using «=> Get to know your cooker............................8 ■=> Get to know the controls............................9 «=> Know your controls Top Oven/Grill.......................10 •=> Know your controls Fan Oven .........................11 «=> Know your controls Programmer........................12 ■=> Using your programmer..........................13-14 *=> Using your grill..................................15 => Grilling chart...................................16 Using your top oven...............................17 «=> Top oven cooking chart.............................18 ■=> Using your fan oven...............................19 <=> Fan oven cooking chart.............................20 «=> Fan oven cooking guide..........................21-22 •=> Cleaning..................................23-24 •=> General......................................25 one General Data O Cabinet Dimensions The Built-in Oven and Grill Unit is designed to fit into cabinets with internal dimensions of: Depth - 550mm Height - 883mm minimum Width - 560-575mm. The minimum depth of the shelf on which the appliance stands should be 500mm. O Appliance Dimensions Height 889 mm Width 595 mm Depth 550 mm O Grill Power Rating Inner element x 1.00 kW Outer element x 1.20kW O Top Oven Power Rating 1 x 1.8kW Oven Lamp 25 watt 230 volt S.A.E.S.(300°C rated) O Oven Power Rating 2.5kW Fan motor 46 watts Programmer 6 push button type Oven Lamp 25 watt 230 volt S.A.E.S. (300°C rated) O Cooling fan Tangential type - 15 watts O Total power Total operating power consumption 4.8kW O Mains supply Voltage 220-240 volts at 50Hz Protection against overheating of surrounding surfaces This appliance is of type "x” WARNING - "THIS APPLIANCE MUST BE EARTHED" ...Installation - General... O The installer The appliance must be installed by a qualified electrician with all electrical and installation requirements made in accordance with the latest edition of the I.E.E. Regulations. Warning - Do Not Attempt To Lift This Appliance By Using The Door Handles This appliance conforms to EMC directive 89/336/EEC. The oven must be connected to the electricity supply via a minimum of a 6.0mm twin & earth cable to a 30 amp double pole control switch which has a minimum of 3mm contact to contact gap. The switch must be located on or recessed in the wall adjacent to the oven housing cabinet. When an electric hob is to be fitted adjacent to the Ariston DOV 317 then a 45 amp double pole cooker control switch may be used to feed both appliances via separate cables. IMPORTANT - THIS APPUANCE MUST BE EARTHED O Position Location Careful thought should be given to the location of the appliance; make sure the cooker is adjacent to work surfaces, and avoid locating:- — in a main "traffic path" of the kitchen or home. — where open oven doors will obstruct or create an awkward working situation. — in a draughty location which may cause a poor air circulation around the cooker. It is also necessary to consider the fact that when using the cooker some parts are going to get warm or even hot. The panels of adjacent furniture should be made of heat proof material and in the case of veneered furniture units, the glue used should resist temperatures of up to 90°C. If your cooker is near a window, make sure that there are no long curtains or drapes which could blow over the cooker and catch fire. Failure to install the appliance correctly could invalidate the warranty, liability claims and could lead to prosecution. This appliance is only intended for domestic cooking of foods in a domestic environment and should not be used for any other purpose. three ...Installation - Steps... STEP 1 PREPARE CABINET • With the cabinet in its intended position, check the appliance base support shelf is level, the cabinet sides are vertical and that the cabinet is firmly secured to the rear wall. • Small inaccuracies in the cabinet can be dealt with by applying suitable shims, providing that the dimensions shown in figure 1 are maintained. If the cabinet is such that the appliance can not be installed level it must be rectified before proceeding with the installation. • Remove all packaging from the appliance. • Figure 2 shows the critical appliance dimensions for fixing into the cabinet. • Note - Any projections within the cabinet must not encroach into an area between 0 and 883mm above the appliance base support shelf and 0 to 170mm ...