Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
• The green indicator light on the ON/OFF key will illuminate. • The oven will beep for one second. • The oven will begin operating in the hold mode. TO MAINTAIN SAFE TEMPERATURE • The amber hold indicator will illuminate. LEVELS, COLD FOOD FOR RETHERMALIZATION OR REHEATING • The previously set hold temperature will be displayed. MUST NEVER BE ADDED TO THE OVEN Press the HOLD Key. WHILE HOT FOODS ARE BEING HELD. CAUTION To change the hold temperature, press the UP or DOWN ARROW Keys. Note: If the oven is being used for hot food holding only, adjust the set holding temperature. Do not press the COOK, TIME, or PROBE keys. Press COOK Key to preheat. • The green indicator light on the COOK Key will illuminate. • Last set cooking temperature will be displayed. To change the cook temperature, press the UP or DOWN ARROW Keys. • The green indicator light on the TIME Key and on the PROBE Key alternately flash. Press PROBE Key. • The green indicator light on the PROBE Key will illuminate. • Last set internal product temperature is displayed. To change the internal product temperature, press the UP or DOWN ARROW Keys. • The green indicator light on the PROBE Key will illuminate. • Halo Heat and Pre-Heat indicator will illuminate. The oven is automatically programmed to preheat to the cook temperature. • The oven will beep when preheated and the preheat indicator extinguished. • Both the Ready and Start indicator lights will flash. The set cook temperature will be maintained by the oven and appear in the display while in the ready/start mode. Load the food inside oven. Remove probe from its bracket, wipe the probe tip with a disposable alcohol pad and insert probe properly into the product. Close the oven door. Note: Oven will beep 3 times every 25 seconds until oven is loaded and START Key pressed. Press and release START key. COOK • The oven will beep. • The green indicators for power, cook, probe, and start will illuminate. • The display will alternate between showing the probe temperature and the elapsed time. HOLD • The oven will beep when the set probe temperature has been reached. • The green indicator for cook will remain illuminated. • The display will alternate between showing the set hold temperature and the amount of time the product has remained in the holding mode. • Ready indicator light will illuminate after 2 hours in the hold mode. Note: The ready indicator does not necessarily indicate a product-ready state. For best results, the product must remain in the oven at the set holding temperature for the minimum number of hours indicated in the individual cooking instructions. • The oven will remain operating in the hold mode until the control ON/OFF Key is pressed. TH/III INSTALLATION/OPERATION/SERVICE MANUAL PG. 17 OPERATINGINSTRUCTIONSOPERATINGINSTRUCTIONS Preset Menu Keys: Alto-Shaam Cook and Hold ovens allow the operator to set up to eight cooking programs. Each cooking program can be preset in any program mode to cook by time or internal product temperature. Cooking programs are recalled and stored using the PRESET Keys labeled "A through H." These keys, along with the key labeled "I" shareadditional functions described in the "User Options" section of this manual. Programming a Cooking Program Prior to this procedure, make sure the oven is “OFF”. Select the food product to be programmed. Press and release control ON/OFF key. The oven will beep for one second and power to the unitwill be indicated by an illuminated green indicator light located in the upper left corner of theON/OFF key. The oven will begin operating in the hold mode. The amber hold indicator will be illuminated and the last set hold temperature will be displayed. Press HOLD Key. To change the hold temperature, press the UP or DOWN ARROW Keys. Press COOK Key. Oven preheat indicator will illuminate and the last set cooking temperature is displayed. To change the cook temperature, press the UP or DOWN ARROW Keys. To cook by time — press the TIME Key. Last set cooking time is displayed. To change the set time, press the UP or DOWN ARROW Keys. The green Time indicator will illuminate. —or — To cook by probe — press the PROBE Key. Last set internal product temperature is displayed. To change the set temperature, press the UP or DOWN ARROW Keys. The green Probe indicator will illuminate. The oven preheat indicator will illuminate. Oven is now in the preheat mode and isautomatically programmed to preheat to the cook temperature. Select a letter code for the product programmed by the previous steps. Press and hold the selected PRESET key until you hear a brief, four second beep. The letter key program indicator light will illuminate and the product programmed is now stored in memory for the specific letter key pressed. Additional programs can be stored in the remaining PRESET Keys if not previously programmed. Note: The last PRESET Key used will be the oven cooking run sequence for the next product to be programmed. Settings can be manually ...