Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Alto-Shaam, модель 1220

Производитель: Alto-Shaam
Размер: 2.34 mb
Название файла: MN-28897_ES_Install_0212.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Hood installation is required. • Water supply shut-off valve and back-flow preventer when required by local code. electrical (DEDICATED CIRCUIT REQUIRED) combismoker® Model VolTage ph hZ aMps kw awg cord & plug additional kw 6•10ESi Touch 208 – 240 1* 60 44.0 - 50.0 9.1 - 12.0 awg 6 no cord or plug + .7 kw 208 – 240 3 60 25.2 - 27.0/ph 9.1 - 11.3 awg 8 no cord or plug + .7 kw 380 – 415 3 50 14.0 - 16.3/ph 9.0 - 11.7 awg 12 no cord or plug + .7 kw 6•10ESi 208 – 240 1* 60 43.4 - 48.7 9.0 - 11.7 awg 6 no cord or plug + .7 kw 208 – 240 3 60 25.0 - 28.2/ph 9.0 - 11.7 awg 8 no cord or plug + .7 kw 380 – 415 3 50 14.0 - 16.3/ph 9.0 - 11.7 awg 12 no cord or plug + .7 kw *elecTrical serVice charge applies weight capacity neT 285 lb (129 kg) Full-siZe pans: gn 1/1: gn 2/1: halF-siZe sheeT pans:* on wire shelVes only 20" x 12" x 2-1/2" 530 x 325 x 65mm 650 x 530 x 65mm 18" x 13" x 1" six (6) six (6) Three (3) Five (5) ship 415 lb (188 kg) craTe diMensions: (l x w x h) 53" x 45" x 49" (1346 x 1143 x 1245mm) 72 lb (33 kg) MaXiMuM VoluMe MaXiMuM: 45 quarts (57 liters) *addiTional wire shelVes reQuired For MaXiMuM capaciTy COMbIThERM® ES SERIES • ELECTRIC INSTALLATION MANUAL #MN-28897 • 9. 6•10esiN 35-9/16" (903mm) 32-15/16" (835mm) WATER DRAIN 33-7/8" (859mm) 35-13/16" (909mm) 2" (50mm) 41-1/16" (1042mm) Water Drain (Side Back) Steam Vent (Top) Electrical Connection (Bottom) 21-7/8" (555mm) 3-5/8" (92mm) 2-1/4" (57mm) 19-1/2"(495mm)12-5/16"(312mm)9-9/16"(242mm) 25" (635mm) 5" (126mm) 35-3/16" (893mm)54-1/8" (1374mm) 26-3/4"(679mm) 7-9/16"(192mm) Treated Water Intake (Bottom) Untreated Water Intake (Bottom) 6-3/8" (161mm) 5-3/8" 21-11/16" (137mm) (550mm) stacking combination dimensions: h x w x d 6.10esin over 6.10esin 67" x 35-13/16" x 38-3/16" (1690 x 909 x 970mm) 6.10esin over 10.10esin 73-1/8" x 35-13/16" x 38-3/16" (1856 x 909 x 970mm) 6.10esin over 7.14es 67" x 44" x 43" (1701 x 1117 x 1090mm) 6.10esin over 10.18es 73-1/8" x 44" x 43" (1856 x 1117 x 1090mm) Mobile option with 5" (127mm) casters will add 2" (51mm) to the overall height 6.10esin over asc-2e 71" x 35-13/16" x 36" (1803 x 909 x 914mm) 6.10esin over asc-4e 71" x 35-13/16" x 35-9/16" (1803 x 909 x 903mm) 6.10esin over asc-4g 73-1/4" x 38" x 44-5/8" (1860 x 966 x 1134mm) dimensions: h x w x d EXTERIOR: 35-3/16" x 35-13/16" x 35-9/16" (893mm x 909mm x 903mm) EXTERIOR WITH RECESSED DOOR: 35-3/16" x 39-13/16" x 35-9/16" (893mm x 1011mm x 903mm) INTERIOR: 17-3/4" x 13-1/4" x 26-1/4" (450mm x 387mm x 665mm) water requirements water quality minimum standards TWO (2) COLD WATER INLETS - DRINKING QUALITY ONE (1) TREATED WATER INLET: 3/4" npT* ONE (1) UNTREATED WATER INLET: 3/4" npT* LINE PRESSURE: 30 to 90 psi 2.8 to 6.2 bar WATER DRAIN: 1-1/2" connecTion wiTh a 2" MiniMuM air gap insTalled as close To The oVen as possiBle * can manifold off of one 3/4" line. using a waTer supply noT MeeTing alTo-shaaM’s MiniMuM waTer QualiTy sTandards will Void This warranTy. it is the responsibility of the purchaser to ensure that incoming water supply is compliant with the specifications listed through adequate treatment measures. installation of the combiguardTM water Filtration system is recommended, but this system may not address all water quality issues present. clearance requirements Contaminant Free chlorine hardness chloride ph alkalinity silica Total dissolved solids (tds) Inlet Water Requirements (untreated water) less than 0.1 ppm (mg/l) less than 3 gpg (52 ppm) less than 30 ppm (mg/l) 7.0 to 8.5 less than 50 ppm (mg/l) less than 12 ppm (mg/l) less than 60 ppm LEFT 6" (152mm) RECOMMENDED SERVICE ACCESS: 18" (457mm) 20" (508mm) FROM HEAT PRODUCING EQUIPMENT RIGHT 4" (102mm) TOP: 20" (508mm) For air MoVeMenT BACK 4" (102mm) BOTTOM: 5-1/8" (130mm) For legs counTer-Top insTallaTions MusT MainTain 4" (102mm) MiniMuM clearance FroM counTer surFace installation requirements • Oven must be installed level. • Hood installation is required. • Water supply shut-off valve and back-flow preventer when required by local code. electrical (DEDICATED CIRCUIT REQUIRED) combismoker® Model VolTage ph hZ aMps kw awg cord & plug additional kw 6•10ESiN Touch 208 – 240 1* 60 44.0 - 50.0 9.1 - 12.0 awg 6 no cord or plug + .7 kw 208 – 240 3 60 25.2 - 27.0/ph 9.1 - 11.3 awg 8 no cord or plug + .7 kw 380 – 415 3 50 14.0 - 16.3/ph 9.0 - 11.7 awg 12 no cord or plug + .7 kw 6•10ESiN 208 – 240 1* 60 43.4 - 48.7 9.0 - 11.7 awg 6 no cord or plug + .7 kw 208 – 240 3 60 25.0 - 28.2/ph 9.0 - 11.7 awg 8 no cord or plug + .7 kw 380 – 415 3 50 14.0 - 16.3/ph 9.0 - 11.7 awg 12 no cord or plug + .7 kw *elecTrical serVice charge applies weight capacity neT 285 lb (129 kg) Full-siZe pans: gn 1/1: halF-siZe sheeT pans:* on wire shelVes only 20" x 12" x 2-1/2" 530 x 325 x 65mm 18" x 13" x 1" six (6) six (6) six (6) ship 415 lb (188 kg) craTe diMensions: (l x w x h) 53" x 45" x 49" (1346 x 1143 x 1245mm) 72 lb (33 kg) MaXiMuM VoluMe MaXiMuM: 45 quarts (57 liters) *addiTional wire shelVes reQuired For MaXiMuM ca...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории