Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
After use allow the oven to cool down completely before unplugging the appliance. During usage of the oven the digital display panel will show current function being used as well as the time remaining. At the end of a cooking cycle, the word “END” will blink in the display and a beeping noise will continuously sound until you press the “STOP / CANCEL” button or one (1) minute has passed. NOTICE Before you use this oven for the first time: The heating elements have a protective coating, which must be burned off before use. To do this, open the oven door and press the OVEN function button and set the temperature to 250..C/480..F. Press the TIMER button and set the oven to operate for a maximum of 20 minutes. It is important to ensure adequate ventilation during this period. • Electrical Connection ..Warning• Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. The appliance is supplied with a molded 2-prong type plug A short power cord is provided to reduce the hazards resulting from entanglement or tripping over a longer cord. An extension cord may be used with care, however, be sure the marked electrical rating is at least as great as the rating of this appliance. The extension cord should be positioned such that it does not drape over the counter or tabletop where it can be pulled on by children or tripped over. The electrical rating of this appliance is listed on the rear wall of the appliance. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. This unit requires a standard 115/120 Volts A.C. ~/60Hz electrical two flat electrical plug socket power cord polarity . The cord should be secured behind the mini kitchen and not left exposed or dangling to prevent accidental injury. Do not pinch, knot, or bend the power cord in any manner. To protect against electrical shock, do not immerse cord, plug, or appliance itself in water or other liquid. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. 8 OPERATING YOUR APPLIANCE • Control Panel FUNCTION SELECTOR BUTTONS Your oven is equipped with three (3) convenient cooking programs: TOAST OVEN PIZZA. Using this function you can toast bread or other baked items to your individual taste by selecting the shade of toasting. By pressing the Oven function you can select from three (3) cooking types using the same button. Press Function One Both top and bottom Time Bake heating elements are on. (1) Both top and bottom Two heating elements are on. Times Convection Convection fan is on and (2) circulates heated air around the food. Top&bottom heating Three elements and bottom Times Broil heating element work (3) alternatively. Use this function when cooking most store-bought frozen pizzas. The preset temperature and timing will ensure that your pizza is cooked to perfection. Use this function when you want to dehydrate your favorite fresh CLOCK / FUNCTION DISPLAY fruits or vegetables. This display window will display the clock once set and the Use this function to thaw frozen foods to room temperature and ready for cooking preparation. Note: For best results we recommend that you follow to specific cooking times and temperatures as required for the dish or item that you are cooking. Frequently check on your food(s) while cooking to . current operation of the oven when in use. prevent over-cooking or burning. 9 Clock Setting the Clock Note: Your oven is equipped with a clock that will display the time in either a 12 hour or 24 hour (Military) time format. Once in the CLOCK SET mode you can switch between the default 24 hour (Military) and a 12 hour time format by pressing the CLOCK button. Press and hold the CLOCK button until you hear a loud “beep” sound. The word CLOCK in the display window will blink intermitently advising that you are now in the CLOCK SET Mode. 24 Hour (Military) Time Format: HR 24 will be displayed in the window showing the default 24 hour (Military) time format. To set the time using the 24 hour (Military) time format simply press either the buttons to set the hour. Each time you press either the or buttons the time will either increase or decrease by one hour and will be shown in the digital display. Press the CLOCK button again to proceed to the minutes setting and set accordingly as shown in setting the hour. Each time you press either the buttons the minutes will either increase or decrease by one minute and will be shown in the digital display. Once you have set the time (hours and minutes) press the CLOCK button to save the setting and exit the CLOCK SET mode. 12 Hour Time Format: To switch between the default 24 hour (Military) time and a 12 hour time format press the CLOCK button once. HR 12 will be displayed in the window showing the 12 hour time format. buttons to set the hour. To set the time using the 12...