Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Cannon, модель 10256G

Производитель: Cannon
Размер: 151.86 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Grill pan and grid Baking dish Oven shelves (2) Literature Aluminium burner bodies (4) Grill pan handle Pan supports (2) Enamelled discs (4) Battery 1.5V LEVELLING Four skid feet are fitted which can be adjusted up or down to level the cooker. CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully. STABILITY BRACKET One of the holes in the rear of the cooker can be used to engage a stability bracket. The bracket must be fitted to the wall behind the cooker. The diagram is a guide to the correct height at which the bracket should be from the floor . 155mm Floor to bracket. CONNECTING TO GAS SUPPLY The cooker is designed to match the depth of standard 600mm worktops. An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed fully to the wall. If a forward facing backplate is used, it must be chased into the wall. 250 250 550680 Connection to the cooker should be made with an approved appliance flexible connection to BS 669. Hoses connected to the LPG models should be suitable for LPG and capable of withstanding 50mbars pressure. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor. The temperature rise of areas at the rear of the cooker that ar ely to come in contact with the flexible hose do not exceed 70oC. INSTALLATION INSTRUCTIONS INSTALLATION AND OPERATIONAL CHECKS After installation, check for gas soundness. The supply pressure can be checked at the grill injector. Access to the injector is by first removing the baffle at the front of the grill fastened by two screws. Then remove the fastening screw on the right hand side of the burner and slide the burner off the injector. Ensure that the grill burner is correctly located under the fixing screw on reassembly. Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan supports. Referring to the instructions for use where necessary, 1. Check that the hotplate and grill burners ignite correctly and burn with a steady flame. Check for a steady flame on the low setting. 2. Check that with the oven set to mark 9, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to the ‘E’ setting that the flame reduces. 3. Check the operation of the minute timer. Instruct the user on the operation of the cooker. Key Contacts Service We have the largest appliance manufacturer’s service team in Europe, trained spe cialists directly employed by us to ensure your complete confidence. Repair Service UK: 08709 066 066 Republic of Ireland: 1850 302 220 You will be asked for the following information: Name, address and postcode. Telephone number Model / Serial number of the appliance Clear and concise details of the query or fault Place and Date of purchase (Please keep the receipt as evidence will be required when the engineer calls). Extended Warranty T...

Эта инструкция также подходит к моделям:
Электрические печи - 10250G (151.86 kb)
Электрические печи - 10251G (151.86 kb)
Электрические печи - 10269G Mk2 (151.86 kb)
Электрические печи - 10268G Mk2 (151.86 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории