Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
PAPER • Feed paper straight into entry (O), releasing when shredder begins shredding; see Product Profile for limits on paper width, shreddable items, sheet capacity, etc. • Press control switch to off [0] position after cutting has stopped. CDs, DVDs (220-2/C-220 only) • Hold CD or DVD at the edge and (E) releasing when shredding begins. Shredder will stop when item has entry. CDs and DVDs will be shredded into small particles. CAUTION: Do not hold CD or DVD the center ring while 1 2 3 To empty waste basket If basket full light (J) is on, follow these steps until light turns off. • Press Turbo Jam Release Button (F) to finish shredding any paper in the paper entry. • Press the off [O] button. • Open the cabinet door (A) and pull out the waste basket (D). • Remove the full bag and replace with a new bag. • Slide the waste basket (D) into the cabinet and shut the cabinet door (A). • Press and hold the reverse [R] button for a few seconds to clear paper shreds that have collected under cutting cylinders. • Alternate between Turbo Jam Release Button (F) and reverse [R] for a few seconds in each position. Caution: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder, open cabinet door (A) and remove wastebasket (D) . • Carefully clear any paper shreds that have collected on under side of paper entry (B) . Caution: Model 220C-2/C-220C (confetti cut model) has exposed blades on underside of paper entry. Use care when removing paper shreds. To clear a paper jam • If paper jam light (I) is on, follow these steps until light turns off. • Check the waste basket (D) and empty the bag if full. • Press and hold the reverse [R] button to back paper out of the paper entry (B). Try pulling gently on the paper to remove it from the shredder. • Alternate between forward and reverse, as needed, until the jam clears: – Press and hold the manual forward button (F) for a few seconds. – Press and hold the reverse [R] button for a few seconds. • Continue alternating between forward and reverse until the jam clears. Caution: The shredder may be damaged if you alternate too rapidly between forward and reverse. Maintenance Empty waste basket regularly to ensure the smooth functioning of the cutting cylinders. The shredder will not operate when the basket is full. Oil confetti-cut model (220C-2/C-220C) regularly to ensure proper operation. If used at or near daily capacity, apply oil every time you empty the basket. Use Fellowes Powershred Lubricant #32250 or other non-aerosol vegetable-based oil in a long-nozzle container (sample oil provided) . CAUTION: Do not use flammable synthetic oil, petroleum-based products, or aerosol lubricants of any kind. To oil the cutting cylinders • Lift paper entry flap (N) and apply oil over full width of cutting cylinders through the paper entry (B). • Press and hold the Turbo Jam Release Button (F) for at least 3 seconds. • Press and hold the reverse [R] button for at least 3 seconds. • Repeat the forward/reverse sequence 3 or more times. • Store oil bottle in slot (L) inside cabinet door (A). 45 Troubleshooting If there is a problem with your shredder, check these symptoms and remedies. If you cannot solve the problem, call your local dealer or contact Fellowes directly. Do not open shredder head to attempt repair. You could be exposed to serious electric shock and will void the warranty. Symptom Remedy Ready Light (G) will not light Make sure shredder is plugged in. Press the automatic button [I]. Shredder does not start or stops while shredding • Make sure shredder is plugged in. Check Troubleshooting lights. • Shredder is jammed. Follow the instructions under Operation. Door ajar light (K) is on Make sure the cabinet door (A) is closed. Basket full light (J) is on Empty the waste basket. Follow the instructions under Operation. Paper jam light (I) is on Clear the paper jam. Follow the instructions under Operation. Confetti-cut shredder (220C-2/C-220C) Shredder Oil the cutting cylinders. Follow the instructions sheet capacity decreases, noise level increases, or under Maintenance. cutting cylinders stop with a squeak or rubbing sound Shredder runs for a few seconds after the paper No action req...
Эта инструкция также подходит к моделям:Измельчители садовые - C-220C (208.36 kb)
Измельчители садовые - 220-2, C-220, 220c-2,C-220c (208.36 kb)