Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Add oil before starting the engine. IMPORTANT: The wheel bearings are not prelubricated. Fill the wheel hubs with grease after assembling the wheels to the axle. CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operating • Maintenance • Repair Parts Call 1-800-448-9282 for missing parts or assembly help. the fastest way to purchase parts FORM NO 41184 rev. (6/8/11) PRINTED IN U.S.A. 2 TABLE OF CONTENTS SAFETY RULES........................................................3,4 FULL SIZE HARDWARE CHART............................5,13 CARTON CONTENTS..................................................6 ASSEMBLY...................................................................7 OPERATION...............................................................15 MAINTENANCE.........................................................17 SERVICE AND ADJUSTMENTS................................18 STORAGE..................................................................18 TROUBLESHOOTING................................................19 REPAIR PARTS ILLUSTRATIONS..................21,22,24 REPAIR PARTS LISTS.....................................21,23,24 SLOPE GUIDE...........................................................25 WARRANTY............................................BACK COVER OPTIONAL ACCESSORY MODEL NO. 45-0253 12 FT. REMOTE HOSE KIT The Remote Hose Kit, Model 45-0253, provides 12' x 5" diameter hose to clean around shrubs, patios, window wells and other areas not accessible to the tractor. SAFETY Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • Read and follow all instructions in this manual before attempting to assemble or operate this equipment. Failure to comply with these instructions may result in personal injury. Keep this manual in a safe place for future reference and for ordering replacement parts. • Read this operating and service instruction manual carefully. Be thoroughly familiar with the controls and proper use of this power vacuum. • Read the vehicle owners manual and vehicle safe operation rules before using this equipment. • Never allow children under 16 to operate this Mow-N-Vac. Children 16 years and older should only operate under close parental supervision. • Do not allow anyone to operate this equipment without proper instructions. • Do not allow passengers to ride on this equipment or on the towing vehicle. • Keep the area of operation clear of all persons, particularly small children. Also keep area clear of pets. • Check fuel before starting engine. Do not fill fuel tank indoors, or when engine is running, or while engine is hot. Wipe off any spilled fuel before starting engine. • Engine and muffler get hot. Do not touch! To avoid fire hazard, keep clean of debris and other accumulations. • Never store Mow-N-Vac with fuel in tank. Allow engine to cool before storing in any enclosure. • Do not change engine governor settings. • Do not operate engine if air cleaner or cover is removed, except for adjustment. Removal of these parts could create a fire hazard. • Keep hands, feet, face, long hair and clothing out of inlet and discharge area. There are ROTATING BLADES inside these openings. • Before cleaning, repairing or inspecting, make certain all moving parts come to a complete stop. Disconnect spark plug wire and keep wire away from plug to prevent accidental starting. Keep throttle control lever in stop position. • If the Mow-N-Vac should become blocked with debris at any point, shut engine off and wait until the impeller comes to a complete stop before attempting to remove the obstruction. Disconnect spark plug wire to prevent accidental starting. • If the cutting mechanism strikes a foreign object, or if your Mow-N-Vac should start to vibrate abnormally, stop the engine immediately, disconnect the spark plug wire and move the wire away from the spark plug. Allow the machine to stop and take the following steps. a. Inspect for damage. b. Repair or replace any damaged parts. c. Check for loose parts and tighten to assure continued safe operation. • Check all bolts for tightness at frequent intervals to help insure safe operation. • Check vinyl hard top boot frequently for wear. Replace if worn or damaged. • Never operate Mow-N-Vac unless deck adapter, hose, hose adapter (nozzle), discharge chute (elbow), and top cover are properly attached in their place. • Do not remove top cover or attempt to empty contents of cart while engine is running. • Never attempt to change hose adapter (nozzle) or to install remote hose attachment when engine is running. • Keep all shields and guards (e.g. discharge chute (elbow) and hose adapter (nozzle) in place and securely attached. • Always wear safety glasses or other suitable eye protection when operating or maintaining this equipment. • Do not stand behind cart in exhaust ...
Эта инструкция также подходит к моделям:Измельчители садовые - Chip-N-Vac 45-0253 (3 mb)
Измельчители садовые - Chip-N-Vac 502493 (3 mb)
Измельчители садовые - Chip-N-Vac 552493 (3 mb)