Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you have difficulty aligning the holes, loosen the two screws on the upper end of the hopper assembly. • Place the six truss machine screws and nuts found in hardware pack in the remaining holes of hopper assembly, alternating sides of the unit and tightening finger tight only. • After assembling all eight screws, tighten them securely. -ATTACHING THE CATCHER BAG Your chipper-shredder is equipped with a catcher bag to catch the shredded material. • To attach the bag, place the opening of the bag over the chute deflector so it completely covers the chute opening. Depress the plunger on the draw- string, and pull on the drawstring until the bag is tight around the chute opening. Release plunger to lock it into position. See figure 5. OPERATION KNOW YOUR CHIPPER-SHREDDER READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER. Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Spark Plug Wire and Boot Fuel Fill Oil Fill and Cap Dipstick MEETS ANSI SAFETY STANDARDS Sears chipper-shredders conform to the safety standard B71.6-1982 of the American National Standards Institute. OPERATING CONTROLS RELEASE BAR—Used to release the hopper when raising or lowering. See figure 10. PRIMER—Pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. See figure 14. STARTER HANDLE—Used to manually start the engine. See figure 6. THROTTLE CONTROL—Permits selection of fast or slow engine speed, and is used to stop the engine. See figure 6. BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE “SAFETY RULES” AS SHOWN ON PAGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL. \ The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear the safety glasses provided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs. We recommend Wide Vision Safely Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores. 7 TO STOP ENGINE • Move throttle control lever to STOP position. See figure 6. • Disconnect spark plug wire and move away from spark plug to prevent accidental starting while equipment is unattended. See figure 6. HOW TO USE YOUR CHIPPER-SHF EDDER Do not attempt to shred or chip any material other than vegetation found in a normal yard (i.e., branches, leaves, twigs, etc.). A WARNING: THE CHIPPER-SH REDDER DISCHARGES MATERIALS WITH CONSIDERABLE VELOCITY. KEEP AWAY FROM THE AREA AROUND THE CHUTE DEFLECTOR. ALWAYS STOP THE ENGINE AND DISCONNECT THE SPARK PLUG WIRE WHEN REMOV ING OR ATTACHING THE BAG WHEN CHANGING CONTAINERS OR WHEN REMOVING THE SHREDDED MATERIAL. WEAR SAFETY GLASSES AND GLOVES WHENEVER USING YOUR CHIPPER-SHREDI (ER. The chipper-shredder is designed for thre