Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
The power supply module is designed for use with the RDA series of Radia enclosures. The RDA-PSM is used to supply extra power to Radia control cards when the amount of power required to drive the modules exceeds the 300 mA supply on each controller. The module's voltage and current ratings are CE, UL, and C-UL approved. Mounting points Line in (hot) Neutral High-voltage connections Transformer External +12 V power connector (optional) Caution: Pre-Installation Notes All Class 1 wiring must be connected to proper terminals. Disconnect power while installing or connecting the unit. Keep top and bottom air vents clear at all times. Test loads for shorts before connecting. Use low-voltage wires with a 300 volt rating or greater. Use field installed copper conductors. All electrical ratings are for continuous duty. For indoor use only. FIG. 1 RDA-PSM RDA-PSM UL and C-UL Ratings • Output: 12 VDC @ 2.5 A output • Input: 120 VAC Specifications • Dimensions (HW): 10.00” x 2.75” (25.40 cm x 6.99 cm) • Non-phase dependant • Use wires rated at 75°C (167°F) • Torque terminals to 16 in-lbs. (1.84 N/M) • Max. wire size: 10 AWG (4 mm2) • Wire stripping length: 0.35” (9 mm) • Fuse rating: GMA 1 A • Weight: 2.0 lbs. (0.91 kg) • BTU/hr: 17 • Provides 2500 mA to drive RDM modules • Dual 2-pin connectors provided Lighting Application Drawing Method A Each dimmed circuit should have a seperate neutral RADIA CONTROLLER FIG. 2 RDA-PSM, 12 VDC 2.5 Amp Power Supply Module (Method A) AMX Corporation reserves the right to alter specifications without notice at any time. For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 043-019-2207 8/02 ©2002 AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time. 3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993...