Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis, Inc. reserves the right to change specifications and other information in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied Telesis, Inc. be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied Telesis, Inc. has been advised of, known, or should have known, the possibility of such damages. Allied Telesis, AlliedWare, AlliedWare Plus, and SwitchBlade are trademarks or registered trademarks in the United States and elsewhere of Allied Telesis, Inc. Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft and Visio are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Additional brands, names and products mentioned herein may be trademarks of their respective companies. Installation Guide Contents About this Guide .............................................................................................................. 4 Compatible Switches ....................................................................................................... 4 Package Contents ............................................................................................................. 5 Installing a Power Supply Unit or Fan .......................................................................... 6 Connecting an AC power supply .................................................................................. 9 Connecting a DC power supply .................................................................................. 11 Checking LEDs ................................................................................................................ 13 Removing a Power Supply Unit or Fan ...................................................................... 15 Troubleshooting .............................................................................................................. 16 Obtaining Documentation and Resources ............................................................... 17 Standards .......................................................................................................................... 19 EC Declaration of Conformity .................................................................................... 20 Removable Power Supply and Fan About this Guide This Installation Guide describes how to install the following PSUs and fans: ¦ AT-PWR01 PSU, either AC or DC power supply unit ¦ AT-PWR02 PSU, AC only ¦ AT-PWR05 PSU, AC only ¦ AT-FAN01, fan-only module ¦ AT-FAN03, chassis fan module Compatible Switches The following table shows which models of PSUs and fans are appropriate for individual switches. Switch PWR01 PWR02 PWR05 FAN01 FAN03 AT-8948 !• x900-48FE !• x900-48FS !• AT-9924T !• AT-9924SP !• AT-9924Ts !• x900-24XT !• x900-24XT-N !• x900-24XS !• SwitchBlade® x908 !• You can download complete documentation for these switches from For more information about the documentation and other resources, see “Obtaining Documentation and Resources” on page 17. Installation Guide Package Contents Depending on the model, switches are shipped with a single supply unit (PSU), either AC or DC. Some models also have fan-only modules (FOM), chassis fan modules, or blanking plates. ¦ The AT-8948, AT-9924Ts, x900-24XT, x900-24XT-N, and x900-24XS switches have a PSU and a FOM installed. ¦ The x900-48FE, x900-48FS, AT-9924T, and AT-9924SP switches have a PSU and a blanking plate installed. ¦ The SwitchBlade® x908 is shipped with dual chassis fan modules and blanking plates, but no PSUs. The following items are included with each factory-installed PSU. Contact your authorised Allied Telesis distributor or reseller if any are damaged or missing. ¦ one AC power cord (AC models) ¦ one power cord retaining clip (AC models) ¦ one warranty card The following items are included with PSUs when purchased separately: ¦ one AC power cord (AC models) ¦ one power cord retaining clip (PWR01 and PWR02 AC models only) ¦ one clip-on ferrite core (PWR05 only) ¦ this Installation Guide ¦ one warranty card The following items are included with fans when purchased separately: ¦ this Installation Guide ¦ one warranty card Removable Power Supply and Fan Installing a Power Supply Unit or Fan Use these instructions to install PSUs, chassis fan modules and FOMs. ¦ Do not combine PWR01 and PWR02 PSUs in the same switch. ¦ Do not combine AC and DC PSUs in the same switch. Before you begin ¦ Read the safety information for the switch. Safety information is in the x900 S...
Эта инструкция также подходит к моделям:Источники питания и БП - AT-FAN03 (612.07 kb)
Источники питания и БП - AT-PWR02 (612.07 kb)
Источники питания и БП - AT-PWR05 (612.07 kb)