|
Фрагмент инструкции
FEATURES Indicators Wall Mounting Each Liebert PSS has a visual SURGE PROTECTION If wall mounting is desired, two keyed slots are provided and indicator that illuminates (green) to show that the surge located on the back of the surge suppressor. suppressor is functioning properly. The Liebert PSS also has an audible alarm to alert you if Wall Mounting Detail the suppression fails. Surge suppressors are often hidden Rear View from view behind furniture and other objects that prevent you from seeing the visual indicator. TROUBLESHOOTING If the Liebert PSS malfunctions during operation, check the following chart for proper adjustment. For further assistance, please contact your local Emerson Network Power representative. Problem Recommended Actions The green Try plugging the Liebert PSS into a different wall receptacle. GROUND • If the indicator illuminates, the Liebert PSS is operating properly and the first wall receptacle needs repair. Please indicator does not illuminate. contact an electrician to repair the faulty receptacle. • If the indicator does NOT illuminate in a different receptacle: • Your building wiring might not contain a ground conductor. In this case, the indicator light will not illuminate but you will still have power out of the Liebert PSS. • The Liebert PSS may have been damaged. Please contact your supplier for any warranty return/repair instructions. The greenTry plugging the Liebert PSS into a different wall receptacle. SURGE • If the indicator illuminates, the Liebert PSS is operating properly and the first wall receptacle needs repair. Please PROTECTION indicator does not contact an electrician to repair the faulty receptacle. • If the indicator does NOT illuminate in a different receptacle: illuminate • The Liebert PSS may have been overloaded and the internal circuit breaker may have tripped. Remove all when loads from device and reset the circuit breaker by pushing the button back in. Replace loads one at a time. powered ON. • The Liebert PSS may have been damaged. Please contact your supplier for any warranty return/repair instructions. SPECIFICATIONS Model Number PRF 1080 NET 1080T AC Power Protection Nominal Operating Voltage 120V Maximum Operating Voltage 130V Rated Output 15A Mode of Protection L-N, L-G, N-G Peak Surge Rating 72,000A Surge Energy 1080 Joules EMI/RFI Filtration Yes UL 1449 Surge Voltage Rating 330V Network Protection Connection Type — RJ45 Protection — 2 Pair © 2008 Liebert Corporation. All rights reserved throughout the Technical Support / Service United States world. Specifications subject to change without notice. 800-222-5877 1050 Dearborn Drive ® Liebert is a registered trademark of Liebert Corporation. (Outside U.S. 614-841-6755) P.O. Box 29186 All names referred to are trademarks or registered upstech@emersonnetworkpower.com Columbus, OH 43229 trademarks of their respective owners. IO-22002_REV0_07-08 Web site: ...
Эта инструкция также подходит к моделям:Источники питания и БП - NET 1080T (410.58 kb)