Войти:
Оценок - 3, средний балл: 4.7 ( )

Инструкция по эксплуатации Vector, модель 831.48854

Производитель: Vector
Размер: 239.52 kb
Название файла: L0210061.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Depress the lock pin on the stem and slide the stem up until the lock pin is visible in one of the three holes in the upright. When the stem is at the desired height, close the quick-release lever so that it is snug against the upright If the quick-release is not snug, see ADJUSTING THE QUICK-RELEASE on the back of this user’s manual. Before using the scooter, make sure that the scooter is set up as described and that all parts are securely tightened. The decal shown at the right has been -placed on the scooter. If the decat is missing, or if it is not legible, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time, to order a free replacement decal. Apply the replacement decal to the location shown. Hand Brake Handle To prevent serious Injury: •Read, understand and follow all warnings and Instructions on the unK and in the manual. •Always wear protective equipment Including helmet, kneepads, wrist guards, and elbow pads. •Keep away from cars, streets or areas that enter vehicle traffic routes. •Never ride when towed behind bicycles, motorcycles, or vehicles. •Do not ride at night or in poor visibility. Storage 1 • Open the quick-release lever. Depress the lock pin on the stem and slide the stem down into die upright. Close the quickrelease lever. 2. Depress the lock pins and remove the handles from the stem. Press the handles into the storage clip on the upright. 3* Pull the thumb tab and pivot the upright down until it locks in the horizontal position. Part List/Exploded Drawing Model No. 83i.4tttmu R0700A No. Qty. Description 1 1 Deck 2 1 Head Tübe 3 1 Fork 4 1 Upright 5 1 Stem 6 2 Handle 7 2 Foam Pad 8 2 Handle Cap 9 3 Lock Pin 10 1 Handle Cord 11 1 Quick Release 12 1 Upright Clamp w/Ring 13 1 Bearing Nut 14 1 Bearing Cap 15 2 Bearing 16 2 Bearing Race 17 2 Bushing 18 1 Pivot Union Bolt Set 19 1 Front Union Bolt Set 20 2 Rear Union Bolt Set 21 2 Wheel 22 2 Rear Wheel Spacer 23 1 Brake Spring 24 1 Brake 25 1 Head TUbe Spring 26 1 Storage Clip 27 2 Front Wheel Spacer 28 1 Lock Pin 29 1 Deck Mount 30 1 Deck Cushion 31 1 Frame 32 4 Deck Screw 33 1 Cable Clip 34 2 Tek Screw 35 2 Brake Spacer 36 1 Mount Union Bolt Set 37 1 Hand Brake 38 1 Brake Bracket 39 1 Cable Bracket 40 1 Brake Cable 41 2 Flange Nut 42 1 Strap Clamp w/Ring * 1 Carry Strap * 1 User’s Manual ♦The user’s manual and carry strap are not shown Note: Specifications are subject to change without notice. Ordering Replacement Parts To order replacement parts, call toll-free 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please mention the model number (831.488540) and the number and description of the parts needed. If the quick-release doesn’t hold the stem snug in place, you will need to adjust it Open the quick-release lever. Turn the adjustment nut clockwise one half turn while...

Эта инструкция также подходит к моделям:
Инвалидные коляски - 167662 R0700A (239.52 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории