Оценок - 3, средний балл: 4.3 ( )

Производитель: Golden Technologies Размер: 944.6 kb Название файла: Язык инструкции:

Push and then release the clamp on the left post of the headrest while you are pulling up or pushing down on the head rest. See figure 10. 2. The headrest will “click” to a stop in one of the preset positions. 3. Repeat step 1 until the headrest is at the desired height. Backrest Angle Adjustment Lever Headrest Clamp Figure 10 Figure 11 BACKREST ANGLE ADJUSTMENT NOTE: The backrest can be folded down to minimize chair height during transport. 1. Pull up on the adjustment lever (see figure 11) and push against the backrest until the backrest is in the desired position. 2. Release the lever. 3. To return the backrest to the upright position, pull up on the lever and move the backrest to the desired position. 17 Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06 COMFORT SETTINGS FOOTREST ANGLE ADJUSTMENT 1. Fold the footrest upward for easy access to the angle adjustment bolt. See figure 12. 2. Use a wrench to turn the adjustment bolt counterclockwise to increase the footrest angle. 3. Use a wrench to turn the adjustment bolt clockwise to decrease the footrest angle. Footrest Angle Adjustment Bolt Figure 12 FOOTREST HEIGHT ADJUSTMENT 1. Remove front cover. 2. Use an Allen wrench to remove the bolts indicated in figure 13. 3. Slide the footrest to the desired height. 4. Align the bolt holes in the footrest and the footrest bracket. 5. Install and tighten the bolts. Footrest Height Adjustment Bolts Figure 13 18 Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06 COMFORT SETTINGS FOOTREST EXTENDING Refer to the pictures below. 1. Lift the rubber pad from the footrest plate. 2. Loosen the (2) footrest adjustment screws. 3. Slide the footrest plate to the desired position and tighten the adjustment screws. NOTE: The maximum extended length is not at the end of the slots. FOOTREST EXTENSION ADJUSTMENT 1. Place the footrest extension onto the footrest as shown below. 2. Install the footrest extension bolt. 3. Install a lock washer and locknut on the bolt and tighten securely. 4. Tighten the set screw. 19 Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06 COMFORT SETTINGS Figure 14 Figure 15 Armrest Height Adjustment Knob Joystick Holder Joystick Bracket Joystick Position Set Screw Armrest Width Adjustment Knobs Figure 16 ARMREST HEIGHT ADJUSTMENT 1. Loosen “Armrest Height Adjustment Knob” (Figure 14) until you can pull it outward. Note: The knob is retained in its housing with a spring. 2. While keeping the knob pulled, raise or lower the armrest to the desired position then release the knob. After releasing the knob, you may have to raise or lower the armrest until it aligns with the nearest locking position. 3. Tighten the height adjustment knob. JOYSTICK BRACKET LENGTH ADJUSTMENT 1. Loosen the setscrew that adjusts the joystick position. See Figure 15. 2. Slide the joystick bracket in or out of the joystick holder to desired position. 3. Tighten the setscrew. ARMREST WIDTH ADJUSTMENT 1. Loosen the adjustment knobs at the rear of the seat. See Figure 16. 2. Slide the arms in or out. 3. Tighten the adjustment knobs. See Figure 16. 20 Figure 17 On/Off Button Speed Control - Faster Horn Button Speed Setting LED Array On/Off Button Speed Control - Faster Horn Button Speed Setting LED Array Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revised 11/30/06 OPERATION Your Compass™ is simple to operate. However, for your safety and the safety of others, Golden Technologies, Inc. recommends that you carefully read and understand the following operating instructions. We also recommend that you practice operating your Compass™ in an area free of any obstacles. Once you have gained confidence in your ability to control your power chair, you will more easily be able to operate it in normal daily conditions. A WORD OF CAUTION Before turning on the power of your Compass™, take note of your environment and set your speed control accordingly. (see “The Speed Control Buttons” Figure 17) For indoor driving, we recommend that you select the lowest speed setting. For outdoor driving, we recommend that you select a speed setting at which you feel comfortable, safe, and in control of your power chair. Familiarize yourself with the features of your Compass™ described below and follow the instructions to safely operate your power chair. DRIVING: The Joystick On/Off Switch Push the on/off button to turn on the power to your Compass™. See figure 17. The 8 LEDs (Light Emitting Diodes) will flash once and a number of LEDs will remain depending on the state of the battery charge. ¦ The LED array, that functions as the battery charge gauge, will light up. See “Battery Charging” on page 28. Pressing the on/off button again will turn off the power to your Compass™. Speed Control - Slower Battery Charge LED Array Joystick 21 Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC Revis...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: