Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
4. Install the armrest socket into the armrest bracket. NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 5. 5. Install long hex screw through armrest socket, tube support, coved armrest spacer, washer, armrest bracket, spacer and armrest bracket as shown in DETAIL “A”. NOTE: Ensure armrest socket is flush in coved spacer. 6. Secure with locknut. DETAIL “A” - TOP VIEW LEFT RIGHT Wheelchair FrameTube Support Armrest Socket Hex Screw Armrest Bracket Spacer Coved Armrest Spacer Coved Armrest Spacer FIGURE 5 - REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT AFTER 7/00 - CONVENTIONAL ARMREST SOCKETS Wheelchair Frame Locknut Tube Support Armrest Socket Short Hex Screw Armrest Bracket Spacer Coved Armrest Spacer Washer 7. Repeat this procedure for the opposite side of the chair frame. Long Hex Screw 5 ARMREST OPERATION CAUTION After any adjustments, make sure the locking mechanism is secured before using the wheelchair. Adjustable Height Armrest (FIGURE 6) HEIGHT ADJUSTMENT. 1. Unlock the arm by flipping the height adjustment lever to the UP position. 2. Adjust the arm to the desired height. 3. Lock the arm by pressing the height adjustment lever into the DOWN position. REMOVING/INSTALLING. 1. Unlock the arm by rotating both release levers towards the outside of the chair. 2. Pull arm straight up and out of the socket. 3. Insert the arm straight down and into the socket. 4. Lock the arm by rotating both release levers toward the inside of the chair. Fixed Height Armrest (FIGURE 6) REMOVING/INSTALLING. 1. Unlock the arm by rotating both release levers towards the outside of the chair. 2. Pull arm straight up and out of the socket. 3. Insert the arm straight down and into the socket. 4. Lock the arm by rotating both release levers toward the inside of the chair. Unlock (Horizontal) Height Adjust- ment Lever Lock (Vertical) Armrest Release Armrest Lever Release Lever FIGURE 6 - ARMREST OPERATION ADJUSTABLE/FIXED HEIGHT ARMREST Swing-Away Armrest (FIGURE 7) SWINGING AWAY. 1. Unlock the arm by rotating the release lever(s) towards the outside of the chair. 2. Pull the front of arm straight up/out of the socket and towards the rear of the chair. 3. To lock, push the arm towards the front of the chair; then downward and into the socket (unlocked). 4. When the arm is in place turn release lever towards the inside of the chair. REMOVING/INSTALLING. 1. Unlock the arm by rotating both release levers towards the outside of the chair. 2. Pull arm straight up and out of the socket. 3. Insert the arm straight down and into the socket. 4. Lock the arm by rotating both release levers toward the inside of the chair. Armrest Release Lever Armrest Release Lever FIGURE 7 - ARMREST OPERATION SWING-AWAY ARMREST 6 NOTES 7 . . . . . !" # " $ # &' . #$% () "*+. -. . ! / . 0. 123!#. 4 ! / . 5 00 . 05 055. 6 0. 7 . 2 89: ; . ...
Эта инструкция также подходит к моделям:Инвалидные коляски - 1036793 (165.01 kb)
Инвалидные коляски - 1094952 (165.01 kb)
Инвалидные коляски - 1094953 (165.01 kb)