Оценок - 4, средний балл: 4 ( )

Производитель: Genie Размер: 696.71 kb Название файла: Язык инструкции:

Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water. The battery pack must remain in an upright position. Genie Lift Part No. 35566 First Edition • Sixth Printing Operator's Manual Explosion Hazards Batteries emit explosive gas. Keep sparks, flames and lighted tobacco away from the battery. Charge the battery in a well-ventilated area. Do not disconnect the charger DC output wires from the battery when the charger is on. Electrocution Hazards Connect the charger to a grounded AC circuit only. Do not expose the battery or charger to water or rain. Before each use, inspect for damage. Replace damaged components before operating. Lifting Hazard The battery pack weighs 80 lbs / 37 kg. Use the appropriate number of people and proper lifting techniques when lifting the battery pack. SAFETY RULES Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Red—used to indicate the presence of an imminently hazardous situation which, if not avoided, will result in death or serious injury. Orange—used to indicate the presence of a potentially hazardous situation which, if not avoided, could result in death or serious injury. Yellow with safety alert symbol— used to indicate the presence of a potentially hazardous situation which, if not avoided, may cause minor or moderate injury. Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage. Green—used to indicate operation or maintenance information. Part No. 35566 Genie Lift Part No. 35566 Genie Lift 7 First Edition • Sixth Printing Operator's Manual LEGEND 24 Brake (option) 25 Fork lock pin 26 Winch mounting bracket 27 Winch 28 Boom (option) 29 Load platform (option) 30 Electric winch battery 31 Electric winch charger 32 Electric winch (option) 33 Electric winch control 34 Electric winch limit switch 35 Red Emergency Stop button 36 Electric winch control up button Straddle Base with 4 Point Casters 37 Electric winch control down button 38 Caster, 4 inch - option A Caster, 5 inch - option B 39 Ladder snap pin 40 Ladder (option) Models with electric winch option Operator's Manual First Edition • Sixth Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection. Know and understand the pre-operation inspection before going on to the next section. 3 Always perform function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended. Fundamentals The pre-operation inspection is a visual inspection performed by the operator prior to each work shift. This inspection is designed to discover if anything is apparently wrong with a machine before the operator tests it. Refer to the list on the next page and check each of the items. If damage or any unauthorized variation from factory delivered condition is discovered, the machine must be tagged and removed from service. Repairs to the machine may only be made by a qualified service technician, according to the manufacturer's specifications. After repairs are completed, the operator must perform a pre- operation inspection again before testing the machine functions. Genie Lift Part No. 35566 First Edition • Sixth Printing Operator's Manual Pre-operation Inspection . Be sure that the operator’s manual is complete, legible and available for reference. . Be sure that all decals are legible and in place. See Decals section. Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications: . Winch and related components . Base components . Legs . Roller wheels . Inner and outer frames . Glide buttons . Carriage hold-down assembly . Cable anchor . Cable and pulleys . Wheels and casters . Forks . Load platform and boom (if equipped) . Nuts, bolts and other fasteners . Cable (kinks, frays, abrasions) . Ladder (if equipped) . Brake system (if equipped) . Limit switch (electric winch models) . Electric winch and related components (if equipped) . Hand controls and wiring (electric winch models) PRE-OPERATION INSPECTION Check the entire machine for: . Dents or damage . Corrosion or oxidation . Cracks in welds or structural components . Be sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened. . Inspect and clean the battery terminals and all battery cable connections. . Be sure there is a minimum of 4 wraps of cable around the winch drum when the carriage is fully lowered. . Be sure the frame channels are properly lubricated and free of debris. Lubricate ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: