Войти:
Оценок - 2, средний балл: 5 ( )

Инструкция по эксплуатации Golden Technologies, модель 8-02 BPWARB

Производитель: Golden Technologies
Размер: 177.82 kb
Название файла: a41f603f-9c7b-4a17-b477-cc8b9e040882.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


UL and CSA certifications insure that our chairs are the safest available. We believe that this product is made from the highest quality components available, is engineered to give you maximum service with minimum maintenance, and is backed up with the strongest warranty in the industry. We hope that you enjoy years of pleasurable use of your Golden Technologies chair and that this chair becomes a true assist to you in both sitting down and standing up. Please take a few moments to review this manual to become familiar with the operation of this chair and our warranty. If you need additional information, please call the dealer from whom you purchased this chair. Also, please note the following safety information: This power lift and recline chair is a piece of medical equipment designed to help you sit down and stand up. Children should not be allowed to operate it without adult supervision. When not in use, the chair should be kept in the sitting position. Again, thank you for selecting this Golden chair. Sincerely, Robert Golden President 1 SAFETY INSTRUCTIONS Your Golden power lift chair is a piece of medical equipment. Therefore, you are required to exercise caution when operating it to ensure your personal safety and that of others around you. The following are rules for safe operation of your Golden Power Seat Lift Chair. . DO NOT ALLOW CHILDREN OR PETS NEAR THE CHAIR WHILE OPERATING. . Make sure all obstacles are clear from under the footrest, under chair or behind chair before reclining or descending from lift position. . DO NOT place fingers or hands between seat cushions, and inside arm of chair while sitting in or while chair is plugged in. . Before retrieving fallen objects: make sure chair is in sitting position and chair is unplugged . DO NOT ALLOW CHILDREN TO PLAY WITH OR OPERATE THE CHAIR AT ANY TIME. . DO NOT ALLOW LIQUIDS TO SPILL ONTO SWITCH OR OTHER ELECTRICAL COMPONENTS. . DO NOT allow anyone to sit on your lap, or on the arm of the chair, or on the footrest while operating the chair. . Please unplug your chair BEFORE you clean or retrieve fallen objects from under it. . IF CHAIR DOES NOT OPERATE AND YOU CAN’T FIND THE PROBLEM, UNPLUG THE CHAIR AND CALL YOUR DEALER FOR ASSISTANCE. CHAIR INSTRUCTIONS While standing next to your chair, press the lift button on the control switch to raise the chair to a height you can sit against. This height will vary from person to person depending on the individual’s needs or preference. When the chair is at the desired height, lean against the chair seat and press the recline button on the control switch. As the chair continues downward move yourself into a sitting position. Release the button on the switch when the chair is firmly set on the floor. To recline, continue to press the recline button and lean back as chair reclines. You can control the reclining movement with the switch by letting go of the button when you reach the desired position. To stand up press the lift button. If you are in a reclined position the chair will move to a seated position, then slowly and gently begin to rise. As the chair slowly rises gradually shift your weight forward. You can steady yourself by holding on to the arms of the chair as it rises with you. When the chair reaches a height that enables you to easily stand, release the switch. You may leave your chair in this position as it should be the same height you need to lower yourself to a sitting position. 2 MAKING POWER CONNECTIONS IN YOUR NEW LIFT CHAIR 1. Remove AC/DC adapter (transformer) from packaging located under base of chair. 2. Place two 9 volt alkaline batteries (not included) into the slots provided on the underside of the adapter. Install the wire connections on each battery. 3. Locate the extension wire secured to the shaft of the lift motor beneath the chair. Connect the female end of the wire to the power cord coming out of the motor. Connect the male end of the wire to the transformer. 4. Make sure all connections are tight. Plug the transformer plug into a standard wall outlet. CHAIR LOCATION You will want to place your chair in the room where it will be most convenient for you, such as near the television, radio, reading light, end table, or other furniture. Leave enough space between back of chair and wall or other obstruction to allow chair to recline (about 14 inches). (Recline space needed may vary based on chair model.) Do not allow any objects to restrict movement of the footrest. Some carpets have a high plush pile that can rub on the bottom of the footrest. This situation can damage the mechanism. You can correct this situation by turning the levelers (located under the front of the chair) to raise the footrest enough to clear the carpet. Your chair is equipped with a battery back up source. 2-9 volt batteries must be installed. Once used, batteries must be replaced. Keep the telephone or some means of communicating with someone within reach. 3 ASSEMBLING/DISASSEMBLING CHAIR BACK TO SEA...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории