Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Au t oSt o p 4. Press the br (10-key) [–] key to turn off automatic sampling stop. Sampling continues until you perform one of the operations below, even if nothing is being input from the microphone. • Melody sampling (page E-19) Press bs and bt at the same time. • Drum sampling (page E-21) Press bs and bt at the same time, or press any keyboard key. Sampling Sounds and Playing Them on the Digital Piano Sampling Sounds and Playing Them on the Digital Piano Deleting a Sampled Sound You can use the following procedure to specify a sampled tone number and delete its data. 1. Press ck (FUNCTION) and then use the br (10-key) [4] (U) and [6] (I) keys to display “DELETE” (page E-7). Flashes DE L E T E 2. Press the br (10-key) [9] (ENTER) key. S1 :Or gnl Used memory Remaining (Unit: Kbytes) memory capacity 3. Use the br (10-key) [–] and [+] keys to select the tone number of the data you want to delete. 4. Press the br (10-key) [9] (ENTER) key. This displays a delete confirmation message. Sure? 5. Press the br (10-key) [+] (YES) key to delete the data, or [–] (NO) or [7] (EXIT) to cancel the delete operation. • After the delete procedure is complete, “Complete” will appear on the display followed by the screen in step 1 of the above procedure. • For information about deleting individual drum sounds in a drum sampling set, see “Editing Sampled Drum Set Sounds” on page E-23. Protecting Against Accidental Deletion of Sampled Sounds You can use the following procedure to protect each sampled sound against accidental deletion. 1. Press bp (TONE) and then use br (10-key) to enter the tone number of the sampled tone you want to protect. 2. Press ck (FUNCTION) and then use the br (10-key) [4] (U) and [6] (I) keys to display “SAMPLING” (page E-7). 3. Press the br (10-key) [9] (ENTER) key. 4. Use the br (10-key) [4] (U) and [6] (I) keys to display “Protect”. Pr o t ec t 5. Press the br (10-key) [+] key to turn on protection. Once protected a tone cannot be deleted. A protected tone is indicated as shown below. * 1: O r g nl Protected ¦ Saving Sample Data on an External Device • Memory card (page E-60) • Computer (page E-67) English E-25 E-26 Playing Built-in Songs With this Digital Piano, built-in tune data is referred to as “songs”. You can listen to the built-in songs for your own enjoyment, or you can play along with them for practice. • In addition to simple listening enjoyment, the built-in songs can be used with the lesson system (page E-30) for practice. • You can increase the number of tunes using your memory cards (page E-61) or computer (page E-67). Use the following procedure to play back built-in songs. 1. Press 7 and 8 at the same time. This will start playback of the demo songs. • See page E-74 for information about song numbers and the song sequence. • Demo playback always starts from song number 151. 2. To change to another song while demo playback is in progress, use br (10-key) [–] and [+] keys to enter the song number you want (page E-7). This will cause demo playback to jump to the song whose number you entered. • You cannot use br (10-key) number buttons to select a song. 3. To stop demo playback, press 7. Demo playback continues until you stop it by pressing 7. Use the procedure below to play back one of the built-in songs. You can play along on the keyboard with song playback. 1. Press bn (SONG BANK). 2. Use br (10-key) to enter the number of the song you want. • See page E-74 for a complete list of available songs. • Use the number buttons to enter the song number. Specify three digits for the song number. 3. Press 7. This starts playback of the song. 33445566778899ckckbnbnbrbrPlaying the Demo Songs D emo T u n e Tune nameSong numberFlashes Playing Back a Particular Song Start/Stop Example:To select 001, enter 0 3 0 3 1. Tw i n k l e Tune nameSong numberLights Key Tempo Beat Measure Fingering Sustain pedal Note E-26 Playing Built-in Songs With this Digital Piano, built-in tune data is referred to as “songs”. You can listen to the built-in songs for your own enjoyment, or you can play along with them for practice. • In addition to simple listening enjoyment, the built-in songs can be used with the lesson system (page E-30) for practice. • You can increase the number of tunes using your memory cards (page E-61) or computer (page E-67). Use the following procedure to play back built-in songs. 1. Press 7 and 8 at the same time. This will start playback of the demo songs. • See page E-74 for information about song numbers and the song sequence. • Demo playback always starts from song number 151. 2. To change to another song while demo playback is in progress, use br (10-key) [–] and [+] keys to enter the song number you want (page E-7). This will cause demo playback to jump to the song whose number you entered. • You cannot use br (10-key) number buttons to select a song. 3. To stop demo playback, press 7. Demo playback continues until you stop it by pressing 7. Use the procedure below to play back one of ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - CDP-220R (2.43 mb)