Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Contents 1 Flat Panel 2X Induction Charging Base for Wii Remotes 2 Rechargeable battery packs for Wii Remotes / battery door units 1 AC power cord Using the Charging System 1) Plug the smaller end of the AC cord into the back of the charge dock and plug the other end into an AC outlet. 2) Remove standard AA batteries from your Wii Remote. Next, insert the Induction Battery Pack / battery door unit into your Wii Remote. (If you are using Wii Remote Jacket or other sleeve on your Wii Remote, you must first remove it.) 3) If you must sync your Wii Remote to your Wii Console upon your first use of the Energizer® Induction Battery Pack, press the small button above the Energizer logo on the Induction Battery Pack. This will activate the Wii Remote’s sync functionaltiy. Afterwards, press the sync button on your Wii console. 4) Replace the Wii Remote Jacket on your Wii Remote. Induction technology allows energy to transfer through the Jacket wirelessly 5) Attach Wii MotionPlus add-on to Wii Remote if desired. The Energizer® Flat Panel Induction Charging System for Wii can charge Wii Remotes with or without the MotionPlus add-on and Silicone Jacket attached. 6) Look for the Wii Remote outlines on the surface of the Energizer® Flat Panel Induction Charger and then place your Wii Remote on the surface accordingly, so that it lines up with one of the outlines (the Wii Remote’s camera should face the Energizer® logo on the charger.) 7) Magnets in the Energizer® Flat Panel Induction Charger will help ensure a perfect charging position. Take note of the attraction you feel when placing the Wii Remote on the Flat Panel Induction Charger and let the magnets guide the Wii Remote to optimal placement. 8) When charging begins the charge indicator lights for each Wii Remote charging position will shine near the Energizer® logo on the Energizer® Flat Panel Induction Charger. Red indicates charging is in progress. ` Green indicates that charging is complete. Frequently Asked Questions Can I charge my Wii Remote with the Wii Remote Silicone Jacket attached? - Yes. Induction technology allows charging through the Silicone Jacket. Can I charge my Wii Remote with a Nintendo MotionPlus attached? - Yes. The MotionPlus and the MotionPlus Silicone Jacket do not interfere with charging. This is one of the great benefits of Induction Technology. Can I use my Wii Remote if the charge indicator light is red? - Yes. Your Induction Battery pack may not be fully charged if the charge indicator light is red when you remove the Wii Remote, but this will not harm the battery. If your Wii Remote runs out of charge, simply return it to the Energizer® Flat Panel Induction Charger for more charging. Can I leave my Wii Remote on the charge dock after the charge light turns green? - Yes. The Energizer® Flat Panel Induction Charger features trickle charging technology that ensures your Induction Battery Pack is never over-charged and will remain ready to play at all times. The charge light went from green to red when I removed my Remote for just a minute – can I still use it? - Yes. Communication takes place between the Induction Battery Pack and the Energizer® Flat Panel Induction Charger. If the Induction Battery Pack is fully-charged when placed on the Induction Charger, the charge indicator lights will change from red to green in a few moments. How long will it take to charge the battery pack(s)? - Approximately 4-hours from a fully discharged condition. My Induction Battery Pack feels a little warm after charging. Is this a problem? - No. A small degree of heat dissipation is a natural byproduct of the Induction Charging process. The heat should be no more than you might feel after charging a cell phone or laptop computer. Can I use the Energizer® Flat Panel Induction Charger to charge other batteries? - No. The Energizer® Induction Base is ...
Эта инструкция также подходит к моделям:Игровые приставки - PL-7581 (1.19 mb)