Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
(2.74 m) USB charging cable Rapid Fire Wireless Controller RF-GPS3101 QUICK SETUP GUIDE Congratulations on your purchase of a new Rocketfish Rapid Fire Wireless Controller. This controller was designed with input from gamers and includes some exciting new features: • A modified design: better stick placement; a responsive, one-piece directional pad; improved handle ergonomics, and one-button Rapid Fire • TouchSense®, dual rumble motors for lifelike vibration • Wireless connectivity to your PS3™ console • Power up your PS3™ console directly from the controller • A built-in, rechargeable NiMH battery Package contents • Wireless controller with a built-in, rechargeable battery • 9 ft. (2.74 m) USB charging cable Rapid Fire Wireless Controller RF-GPS3101 Product features Top PS # Description 1 PS button 2 Select button 3 Left stick 4 Rapid Fire button 5 Directional pad 6 Start button Back # Description 1 USB port 2 R1 button 3 R2 button Charging the battery Before you use the controller for the first time, or after you have not used it for a long time, you must charge the battery. (If the controller will not be used for long periods of time, the battery should be recharged at least once every six months.) It takes approximately 3.5 hours to fully charge the battery. To charge the battery 1 Insert the mini-USB plug on the charging cable into the USB port on the front of the controller. # Description 7 button 8 button 9 button 10 button 11 Right stick/R3 button 12 Power switch # Description 4 Port indicators 5 L1 button 6 L2 button IMPORTANT: Make sure that the min-USB plug is aligned correctly with the port before inserting into the plug to avoid damaging either the port or the plug. NOTE: Recharging a battery that has not been fully PSdischarged shortens its life. 2 Insert the USB plug into the USB port on your PS3, which must be plugged in and drawing power. 3 Turn on your PS3. The battery starts charging and the PS button in the middle of the controller lights blue. When the battery is fully charged, the PS light turns off . Pairing your controller Before you use your controller, you need to pair it with your PS3 console. 1 Connect the USB cable between your controller and PS3 console. 2 Turn on the controller, then press its PS button. When the PS3 recognizes your controller, all the port indicators fl ash slowly. PS21432143When your controller has been assigned to a port, the indicator number for the port turns solid red. 3 Press the PS button again to assign a port number. Notes: • Pairing and assigning controller numbers can only be done when the system is turned on. • When a paired controller is used with another PS3 system, the pairing with the original system is cleared. Pair the controller with the system again if the controller has been used with another system. • If the controller or the system is turned off, the port indicators on the controller turn off and the assigned number is cleared. Programming the Rapid Fire button You can program the Rapid Fire button to perform a series of moves. 1 Press and hold the Rapid Fire button, the PS button fl ashes in red. 2 Do not release the Rapid Fire button. Press the button(s) you want to set to turbo. PS Rapid Fire button 3 Release all the buttons. The Rapid Fire button is programmed. PS Notes: • You can set different speeds of the Rapid Fire function. There are three speed levels. • The default speed is Quick when you first press the Rapid Fire button. • Press again the Rapid Fire button, the PS button will flash slower and the Rapid Fire speed is Medium. • Press the Rapid Fire button for the third time, the Rapid Fire speed will be Slow and the PS button will fl ash slowly. • Press again, the Rapid Fire function will be turned off . Warnings: • Some medical studies have suggested that long periods of repetitive motion may be linked to certain types of physical discomfort or injuries. You should take frequent breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or hands, consult a qualified health professional. • Do not use the Rapid Fire Wireless Controller if you have respiratory, heart, or other physical ailments that limit your physical activity. If you have any doubts, consult a qualified health professional. • The Rapid Fire Wireless Controller is not intended for use by small children. It may contain small pieces that may pose a choking hazard. • The Rapid Fire Wireless Controller can emit radio waves that can aff ect the operation of nearby electronics, including cardiac pacemakers. • Do not operate the Rapid Fire Wireless Controller within 9 inches (23 cm) of a pacemaker. • If you have a pacemaker or other implanted medical device, do not use the Rapid Fire Wireless Controller without fi rst consulting your doctor or the manufacturer of your medical device. • Follow all regulations regarding use of wireless devices in locations such as hospitals, airports, and on board aircraft. Operation in those locations may...