Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Use this diagram to familiarize yourself with the function and location of each component before using the FLIGHT Controller. The following functions are available with the FLIGHT Controller: • Joystick Control The joystick is used to control the direction and speed of the power chair. • SpeedAdjustment The user can increase or decrease the maximum speed of the power chair. • Sleep Mode This feature is designed to preserve battery charge, and can be disabled through programming. FLIGHT Controller Basic Operation Instructions Horn Key Activates a warning horn. Joystick A multi-functional tool used to control speed and direction. Off-board Charger/ Programming Socket Connects to battery charger plug or programmer Speed Decrease Key Used to decrease the speed setting Speed Increase Key Used to increase the speed setting On/Off Key Press to power on or off the power chair and controller. Speed Setting Indicator Series of five colored LEDs which display the speed setting. Battery Condition Meter Indicates the approximate amount of battery life using color-coded LEDs. Figure 1. FLIGHT Components and Connections FLIGHT Controller Basic Operation Instructions OPERATING THE FLIGHT CONTROLLER The FLIGHT Controller isused to operate your power chair and all of its components. The FLIGHT controller consists of (see figure 2): 1. joystick 2. keypad 3. off-board charger/programming socket 4. controller connector 5. power module 2 3 4 5 1 Figure 2. FLIGHT Controller Joystick Control The joystick controls the direction and speed of your power chair. When you move the joystick from the neutral (center) position, the electromagnetic brakes release and allow your power chair to move. The farther you push the joystick from its neutral position, the faster your power chair moves. When you release the joystick and allow it to return to the neutral position, you engage the electromagnetic brakes. This causes your power chair to decelerate and come to a complete stop. FLIGHT Controller Basic Operation Instructions SPEED DECREASE KEY SPEED SETTING INDICATOR BATTERY CONDITION METER ON/OFF KEY SPEED INCREASE KEY HORN KEY Figure 3. FLIGHT Keypad Keypad The keypad is located directly in front of the joystick. It contains keys that you will use to control your power chair. See figure 2. On/Off Key The on/off key turns the system on and off. WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING! Always turn the power off when you are stationary to prevent unexpected movement. FLIGHT Controller Basic Operation Instructions Battery Condition Meter The battery condition meter consists of ten lights arranged in an arc over the on/off key. As the battery voltage drops, the number of lights reduces from right to left. When the battery capacity drops to 10% or below, the left red LED will flash. • Left Red LED Flashing: Battery charge is low; charge the batteries as soon as possible. • Right-to-Left Ripple of LEDs: FLIGHT is in lock mode; unlock the FLIGHT. • Left-to-Right Ripple of LEDs Alternating with Steady Display: FLIGHT is in programming, inhibit, or charging mode. • Right Green LED Flashing: FLIGHT is in speed limit mode. • All LEDs Flashing Continuously: The joystick was not in the neutral position when the controller was turned on. If you get “all LEDs flashing continuously,” turn off the controller, allow the joystick to return to the neutral position, then turn on the controller. • All LEDs Flashing Quickly (Code): The FLIGHT has detected a fault; refer to the Error Code table. Speed Keys There are two keys that control the speed. Press the speed increase key to increase the speed. Press the speed decrease key to decrease the speed. The speed setting is displayed on the speed setting indicator. If your power chair was programmed with a drive profile, contact your authorized Pride Provider for more information. NOTE: We recommend that the first few times you operate your power chair, you set the speed to the slowest setting until you become familiar with your new power chair. Horn Key The horn key activates a warning horn. CONTROLLER CONNECTOR This connects the FLIGHT to the power module located on the power base. FLIGHT Controller Basic Operation Instructions OFF-BOARD CHARGER/PROGRAMMING SOCKET You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the front of the FLIGHT. If you use an off-board charger, the charger current should not exceed 8 amps. Contact your authorized Pride Provider for more information. WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/programming socket. See your authorized Pride Provider for more information. NOTE: The socket may also be used for reprogramming the FLIGHT. Contact your authorized Pride Provide...
Эта инструкция также подходит к моделям:Игровые приставки - Controller Flight (98.88 kb)