Оценок - 5, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
26-447 4-Fire Button Analog Joystick w/ Throttle and 4-Way Hat Switch FEATURES You can enjoy the fun and versatility of your new PC compatible 4-Fire Button Analog Joystick with your computer game software. It gives you comfortable and accurate control for any game software that requires a joystick. Your joystick’s features include: Four Fire Buttons — let you load/select weapons, assign targets, select cockpits. Turbo Speed Selector — gives you two turbo speed options, 1 for a lower speed and 2 for a higher speed. Turbo Switch — lets you turn on or off the turbo function easily. Hat Switch (knob) — lets you change the point of view outside the cockpit, change direction, or control altitude. Hat Switch Selector — offers the flexibility to have the hat switch on or off depending on your game’s software/hardware requirements. Throttle Control (gear stick) — gives you control over incremental game functions such as increasing and decreasing speed. Throttle Selector — offers the flexibility to have the throttle switch on or off depending on your game’s software/hardware requirements. X-/Y-Axis Trim Controls — give you extra fine-tuning to center the joystick. Four Suction-Cup Stabilizers — keep the joystick firmly in place when the action gets hot! COMPATIBILITY Hardware Your joystick works with IBM® and compatible PCs equipped with a joystick port, using the industry-standard 15-pin D subminiature connector. Note: Joystick ports are also available on game cards and enhanced sound cards. Software You can use your joystick with any PC compatible software written to support a joystick. Your joystick is completely compatible with CH FLIGHTSTICK PRO®. PREPARATION Connecting Your Joystick Cautions: • Turn off your computer's power before you connect or disconnect your joystick from the joystick port. • When connecting or disconnecting your joystick, always grasp the connector and not the cable. • Do not pull or stretch your joystick's output cable. © 1999 Tandy Corporation. All Rights Reserved. RadioShack is a registered trademark used by Tandy Corporation. 26-447.fm Page 2 Tuesday, June 22, 1999 10:02 AM 26-447.fm Page 2 Tuesday, June 22, 1999 10:02 AM Follow these steps to connect your joystick. 1. Turn off your computer. 2. Plug your joystick's connector into the joystick port. Note: If you have two joystick ports, you can use either port, A or B. Most software, however, uses the top (A) port for the primary joystick. Refer to your software’s user’s manual. 3. Turn on your computer and run your software game program. CENTERING THE JOYSTICK Your joystick has a spring-loaded self-centering system that returns the control stick to its center position when you release it. Before you use the joystick for the first time, or after you have used it for a while, this center position might require fine-tuning. Software-Controlled Joystick Centering Most joystick-compatible software includes a calibration routine to automatically center a joystick. If your software has this routine, refer to the application’s software manual for instructions on how to select the joystick as your input device. Then follow the program's instruction screens (which generally appear within the set-up portion of the program) to define the limits of the joystick's range. If the software’s joystick-calibration routine does not automatically center the joystick, see “Manual Joystick Centering” to manually adjust the appropriate trimmer (X- or Y-axis). Manual Joystick Centering Use the X- and Y-axis trimmers to manually center the joystick if your software does not include its own calibration routine, or if the routine does not center the joystick. Y-Axis Trimmer X-Axis Trimmer The X-axis trimmer adjusts left/right centering, and the Y-axis trimmer adjusts up/down centering. Slowly slide each trimmer until your software's display shows that your joystick is centered. Configuring/Centering the Joystick in Windows® 95/98 1. From the Start Menu, select Settings, then click on Control Panel. 2. Double-click on the joystick icon. 3. To configure the joystick with the hat switch, select CH FLIGHTSTICK PRO, then switch THROTTLE to ON, HAT to ON and TURBO ON to off. TURBO SPEED ON OFF HAT 2 THROTTLE OFF 1 ON 4. Click on Properties. 5. Click on Calibrate and follow the instructions in the windows that appear. 26-447.fm Page 3 Tuesday, June 22, 1999 10:02 AM 26-447.fm Page 3 Tuesday, June 22, 1999 10:02 AM OPERATION The joystick comes with a range of control buttons (such as the fire buttons) that have different applications depending on your game program. Check with your game’s software guide to find out which functions work with the joystick’s buttons. Fire ButtonsHat Switch Trigger-Style Fire Button (in front) Caution: Do not use excessive pressure on the control stick or fire buttons. Using the Throttle Contr...
Эта инструкция также подходит к моделям:Игровые приставки - 26-447 (130.42 kb)