Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
While our devices are tested and optimised for electromagnetic compliance in our laboratories, interference during operation may still occur in the device itself and with other devices in its proximity. Should such interference occur, try to eliminate it by adjusting the positions of and the distances between the devices. Before driving, please ensure that the electronic systems of the car are working properly. Connection When connecting your appliance it is important to observe the following instructions: Power supply through Car Adapter . The car adapter should only be connected to the lighter socket of a car (car battery = DC 12V , truck battery = DC 24V ). If you are in any doubt about the power source in your car, please contact your car manufacturer. Cabling . Arrange cables so that they do not cause unnecessary obstruction or risk entanglement or snaring. E.g. ensure that the cables cannot be trod on, or tripped over. . Do not put any objects on the cable, because it could be damaged if you do so. . Do not use any force and pay attention to the correct orientation of the plug when connecting the cables and plugs. . Do not permit any great forces to be exerted on the plug connections, from the side, for example. This will lead to damage in and to your device if you do so. . Avoid short circuiting and broken cable by not crushing or bending it sharply. Battery Operation Your appliance is powered by an integrated battery. In order to prolong the life and efficiency of your battery and ensure safe operation, follow the instructions below: . Batteries cannot withstand excessive heat. Take care to avoid overheating of appliance and the integrated battery. Failure to comply with this instruction may lead to damage to or, even explosion of the battery. . Only use the car adapter to charge the battery. . The batteries are special category waste. When disposing of the appliance ensure that this is done correctly. Contact Customer Service for more details. Care of the Display . Avoid scratching the display surface as this may be easily damaged. We recommend using a display protection film (mylar) to prevent scratching of the screen. Please contact your nearest dealer for this accessory. The plastic on the display at delivery is purely for protection during transportation! . Ensure that no traces of water remain on the screen. Water can cause irreversible discoloration. . Use only a soft, lint-free cloth to clean the screen. . Do not expose the screen to strong sunlight or ultraviolet radiation. NOTICE! Protective film is on the surfaces to protect the device against scratching during production and transportation. Pull off all the film after you have set up the device correctly and before bringing it into operation. Supplied Items Please check the condition of items supplied and check for missing items using the list below. If you find your package to be incomplete, please forward to us all claims for missing item...