Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
72 of 82 25.3. Additional Card Material Your navigation system is already equipped with digitalised map material in the internal memory and/or memory card at the factory. Depending on the configuration, additional maps may be included on your navigation CD/DVD. You will be able to transfer these cards to a memory card immediately. It is recommended that you use an external card reader (see also page 72). The GoPal Assistant supplied with the device enables a simple and individual compilation of the map material to be transferred. Depending on the amount of map data on the navigation CD/DVD, memory cards with capacities of 256 MB, 512 MB, 1.024 MB or more may be required. You can obtain additional memory cards in specialist stores. 25.3.1. Transfer of Card Material to a Memory Card The transfer of additional card material to a memory card can take place through Explorer on your PC via the following steps: • Insert the CD/DVD with the card material required. • Start your workstation and select your CD/DVD Drive. • Copy the file with the .psf ending out of the Directory of the region that you require to the MapRegions Directory on your memory card, from the CD/DVD. You can transfer several files with map material to your memory card, depending on the capacity of the memory card. If you have copied digitized maps of several countries or country groups onto your memory card, you will be required to select the desired map in the navigation application of your device. 25.3.2. Alternate Method of Installing Navigation Software (using a memory card) The software for your navigation system can be installed directly from a memory card. The pre-installed software may have to be uninstalled beforehand (see the chapter on “21. Special CleanUp Function”, page 64). You will be requested to install the navigation software during the initial adjustment. Please proceed as follows: • Remove the memory card from the packaging carefully. Ensure the contacts are not touched or soiled. • Push the memory card into the corresponding slot until it engages. • Click on OK, in order to install the application. The main screen, through which you will now be able to carry out the navigation settings, will appear after all data has been copied to your navigation system. 73 of 82 25.3.3. Transferring Installation Files and Map Material to the Internal Memory PLEASE NOTE! The navigation system must be connected to a computer by means of ActiveSync® for the transfer of the data. Your device has an internal, permanent memory, which is located in the \My Flash Disk directory. You will be able to make this directory, and others, visible with ActiveSync®, by means of the Search option. Directories and files can be manipulated as in Windows Explorer. The required directory must have been stored, in order to make the installation files and the map material for the device available. Deposit ...