Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Only follow the instructions when circumstances and driving rules permit it! The navigation system will guide you to your destination even when you have to deviate from your planned route. . The direction statements of the navigation system given do not release the driver of the vehicle from his or her duty of care or personal responsibility. . Plan routes before you leave. If you want to plan a new route whilst on the road pull over and stop driving. . In order to receive the GPS signal correctly, keep away from metal objects as they may hinder reception. Attach the navigation system onto the inside of the windscreen or near the windscreen with the suction cup. Try out different positions in your vehicle in order to find the best reception. -24 Notes for Use in a Vehicle . Take care that the holder does not present any risk to safety, even in the case of an accident, when installing it. . Take care that the cable does not impede any safety components. . The display of your navigation system may show “light reflections”. Please take care of not being “blinded” during operation. . Do not mount the components within the operating range of any airbags. . Check the secure adherence of the suction cup at regular intervals. . The power plug will consume power, even if no device is connected. Remove it when not in use to avoid draining the car battery. . Check all safety equipment in your car after installation. Note Do not leave your navigation software in the vehicle when you leave it unattended. You should also uninstall the holder for security reasons. Francais English -25 Aerial Orientation The aerial must have unrestricted access to the sky to receive GPS satellite signals. Place the aerial as horizontally as possible for this reason. Try out aerial and installation possibilities in the vehicle if the reception is inadequate. I. Mounting the Car Holder Attention! Only fix the holder for the navigation system to the windscreen, if it does not impede the view. Snap-in lever (similar picture) Note Your navigation device can also be equipped with a different but similar vehicle attachment as an alternative, according to the version. -26 Note Clean the windscreen thoroughly with a glass cleaner. Warm the disk and the nipple slightly at temperatures below 15° C. Place the holder with the suction head directly onto the wind screen and press the lever on the suction head downwards. The sucker will attach itself to the background firmly. II. Attaching the Navigation System 1. Connect the car adapter and, if necessary, the TMC aerial to your navigation system and insert the memory card. 2. Place the device below in the centre of the holder. 3. Press it gently backwards until it engages audibly. 4. Place the holder on the fixing catches of the car holder. 5. Now, push the unit to the side until it engages audibly. 6. Now you will be able to place the complete unit on the cleaned windscreen or the suction plate. Francais English -27 ...