Оценок - 2, средний балл: 4 ( )

Производитель: Humminbird Размер: 942.67 kb Название файла: Язык инструкции:

Basic shows land areas, ports, obstructions and restricted areas. Navigation shows navaids, landmarks, ferryways and navigation routes in addition to the Basic information. Underwater shows depth contours, fishing areas, underwater wrecks, tides and currents in addition to the Basic and Navigation information. All shows roads, buildings, railways, and other notations in addition to the Basic, Navigation and Underwater information. To change the Chart Detail Level setting: 1. Highlight Chart Detail Level on the Chart main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart Detail Level setting. (Basic, Navigation, Underwater, All, Default = All) NOTE: Some chart details are only available with optional-purchase MMC/SD cards. 73 Map Borders Map Borders 41 Hidden i Map Borders allows you to display or hide map borders. A Map Border indicates an area which contains a different map. Map Borders Map Borders To change the Map Borders setting: 1. Highlight Map Borders on the Chart main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Map Borders setting. (Hidden, MMC/SD Only, All Visible, Default = MMC/SD Only) 74 Lat/Lon Grid Lat/Lon Grid H Hidden ► Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines. To change the Lat/Lon Grid setting: 1. Highlight Lat/Lon Grid on the Chart main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Lat/Lon Grid setting. (Hidden, Visible, Default = Hidden) Spot Soundings Spot Soundings H Hidden ► Spot Soundings allows you to display or hide spot soundings, which are depth measurements shown on the chart. NOTE: Spot Soundings are only available with optional-purchase MMC/SD cards. To change the Spot Soundings setting: 1. Highlight Spot Soundings on the Chart main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Spot Soundings setting. (Hidden, Visible, Default = Visible) Navaids on Bird's Eye View Navaids on Bird's Eye view <| Hidden Navaids on Bird's Eye View allows you to display or hide additional navigational aids, such as lights and buoys, in Bird's Eye View. NOTE: You will see more navigational aids with and optional-purchase MMC/SD card. To change the Navaids on Bird's Eye View setting: 1. Highlight Navaids on Bird's Eye View on the Chart main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Navaids on Bird's Eye View setting. (Hidden, Visible, Default = Visible) 75 Shaded Depth 15ft Shaded Depth 0( I )60 Shaded Depth allows you to change the depth used for shading on the chart views. To change the Shaded Depth setting: 1. Highlight Shaded Depth on the Navigation main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Shaded Depth setting. (Off, 1 to 60 Feet or 1 to 20 Meters [International Units only], Default = 15 ft, 5 m) Set Simulation Position (Advanced) Set Simulation Position allows you to set the position of the boat used in the Simulator. The Set Simulation Position menu choice is only available when User Mode is set to Advanced (see Setup Menu Tab: User Mode). To set the Simulation Position: 1. Activate the cursor and move it to the coordinates from where you want the simulation to start. NOTE: The cursor must be active in order for this procedure to work. 2. Make sure you are in Advanced User Mode, then highlight Set Simulation Position on the Chart main menu. 3. Use the RIGHT 4-WAY Cursor Control key to change the Simulation Position setting. A confirmation dialog box will appear to allow you to change your mind, or to confirm your choice. If the cursor was not active before you began this procedure, you will see an error message. Exit the menu, set the cursor, then try again. Set Simulation Position _► 76 Set Map Offset Set Map Offset _► (Advanced) Set Map Offset allows you to change the map offset used by your Chartplotter. The Set Map Offset menu choice Is only available when User Mode Is set to Advanced (see Setup Menu Tab: User Mode). NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map Offset should be cleared if a different map is to be used. To change the Map Offset setting: 1. Activate the cursor and move it to the location where the Map Offset will be applied. NOTE: The cursor must be active in order for this procedure to work. 2. Make sure you are in Advanced User Mode, then highlight Set Map Offset on the Chart main menu. 3. Use the RIGHT 4-WAY Cursor Control key to set the Map Offset. A confirmation dialog box will appear to allow you to change your mind, or to confirm your choice. If the cursor was not active before you began this procedure, you will see an error message. Exit the menu, set the cursor, then try again. Clear Map Offset ► Clear Map Offset (Advanced) Clear Map Offset allows you to clear the Map Offset. The Clear map Offset menu choice is only available w...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: