Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. NOTICE Unauthorized changes or modifications to this equipment may void compliance with FCC Rules. Any change or modification must be approved in writing by Marine Division of Vertex Standard. Page 2 CPV350 Congratulations on you purchase of the CPV350C GPS Chart Plotter with VHF FM Marine Transceiver! Congratulations on you purchase of the CPV350C GPS Chart Plotter with VHF FM Marine Transceiver! ment of this GPS chartplotter. STANDARD HORIZON technical support personnel stand behind every product we sell, and our Product Support team invites you to contact us should you require technical advice or assistance, at 800/767-2450. CAUTION The GPS chartplotter is designed for maritime use. Please give attention to avoid water intrusion into the C-MAP NT+/MAX C-CARD cartridge holder. Extensive exposure to heat may result in damage to the GPS chartplotter. The GPS chartplotter contains dangerous high voltage circuits which only experienced technicians can handle. STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material. CLEANING PROCEDURE FOR THE CHARTPLOTTER SCREEN Cleaning of the chartplotter screen is a very important and must be done carefully. Since the surface is covered by a antireflective coating, the procedure for cleaning all the surfaces can be performed using the following procedure: You need a soft tissue or towel and a cleaning spray (Windex) containing Isopropanol (a normal spray cleaner sold for a PC screen, for example PolaClear by Polaroid). Fold the tissue or lens tissue into a triangular shape, moisten the tip and use the index finger behind a corner to move the tissue across the surface, in overlapping side to side strokes. If the tissue is too wet, a noticeable wet film will be left in its path and you will need to repeat the process. If too dry, the tissue won’t glide easily, and may damage the surface. CPV350 Page 3 TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................................................... 8 1.0 GENERAL INFORMATION .............................................................................................. 8 1.1 PACKING LIST .................................................................................................................9 1.1.0 Packing List ........................................................................................................ 9 1.2 OPTIONAL ACCESSORIES ............................................................................................ 9 1.3 SAFETY / WARNING INFORMATION ........................................................................... 10 1.3.0 VHF Marine Antenna Installation ...................................................................... 10 1.3.1 ON-LINE Warranty Registaration ..................................................................... 10 1.3.2 Product Support Inquires .................................................................................. 10 1.4 FCC RADIO LICENSE INFORMATION ......................................................................... 11 1.4.0 Station License ................................................................................................. 11 1.4.1 Radio Call Sign ................................................................................................ 11 1.4.2 Canadian Ship Station Licensing ..................................................................... 11 1.4.3 FCC / Industry Canada Information ................................................................. 11 2. GETTING STARTED .................................................................................................................. 12 2.0 MOUNTING THE GPS CHARTPLOTTER ..................................................................... 12 2.1 BRACKET MOUNTING .................................................................................................. 12 2.2 FLUSH MOUNTING ....................................................................................................... 13 2.3 CONNECTIONS ............................................................................................................ 14 2.3.0 Rear Panel Connections .................................................................................. 14 2.3.1 VHF Antenna .................................................................................................... 15 2.3.2 Selecting a Marine VHF Antena .................................................................