Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Remove a C-MAP NT+/MAX C-CARD if present and insert the optional User C-CARD into the slot. 2. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT] or move the ShuttlePoint knob to the right. 4. A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and press [ENT]. 5. A popup SAVE FILE window will appear. In this window you can change the name and the file type by using the ShuttlePoint knob and pressing [ENT], when finished press [CLR] once. 6. To save the file to the User C-CARD. 12.0.2 Loading a file If you have a problem and accidentally loose the User Points in the GPS Chart Plotter with the optional User C-CARD it is possible to load the data back into the GPS Chart Plotter using the following procedure: 1. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the ShuttlePoint knob to the right. 2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT] or move the ShuttlePoint knob to the right. 3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and press [ENT]. 4. Move the ShuttlePoint knob to the left to highlight LOAD and press [ENT]. 5. A popup information window will appear when loading is complete. 6. Press [ENT] to confirm. 12.0.3 Deleting a file from the User C-CARD You may want to delete a saved file on the User C-CARD. 1. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT] or move the ShuttlePoint knob to the right. 2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT] or move the ShuttlePoint knob to the right. 3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and press [ENT]. 4. Move the ShuttlePoint knob to the left to highlight DELETE and press [ENT]. 5. A popup Warning window will to confirm you want to delete the file. 6. Press [ENT] to confirm. Page 62 CPV550 12.0.4 Changing the slot You may want to change the "active" slot, the slot which contains the working User C-CARD. 1. From the chart page, press the [MENU] key. Move the ShuttlePoint knob to highlight USER POINTS and press [ENTER] or move the ShuttlePoint knob to the right. 2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENTER] or move the ShuttlePoint knob to the right. 3. Open the door, insert another User C-CARD into a free slot. 4. Move the ShuttlePoint knob to highlight CHANGE and press [ENTER]. This "new" User C-CARD is now ready to receive and store information. CPV550 Page 63 13. PAGES The GPS Chart Plotter has many pages that are designed to ease your navigation. CHART NAVIGATION HIGHWAY CELESTIAL GPS STATUS NMEA DISPLAY FISH FINDER full screen window KtsM3.1015°353°M Shown only with optional FF520 connected Figure 13 - Screen display pages The pages can selected in one of two ways: Selection by MENU Press [MENU], move the ShuttlePoint knob to highlight the desired Page in the Main Menu page and press [ENT]. Figure 13a - Screen display pages (by [MENU]) Selection by SOFT KEY Pressing any Soft Key under the display, then press the Soft Key to show the desired page. Figure 13b - Screen display pages (by Soft Keys) Page 64 CPV550 13.0 CHART PAGE The Chart page is the main page of the GPS Chart Plotter. From this page the user can zoom in/out, pan around the chart, show information about cartographic objects, see the exact vessel position with the COG and SOG, place points, GOTO a destination point, show Track history etc. The GPS Chart Plotter is provided with a Worldwide background showing C-MAP NT+/MAX detail up to 2.0 NM. For more detail, optional C-MAP NT+/MAX C-CARDs are used. 42135 Fix Status Cursor coordinates Speed Over Ground and Course Over Ground Distance and Bearings from Fix to Cursor (if the Fix is NOT received, DST and BRG are empty) Chart Scale 15243 Figure 13.0 - Charts and general text area 13.0.0 Window Selections The window on the right side of the Chart page is called the General Window and it may be edited, customized or even changed to show a highway or compass tape. FULL CHART (None) GENERAL 1 LINE SMALL 1 LINE LARGE 2 LINES SMALL HIGHWAY COMPASS Figure 13.0.0 - Data window layout 1. To change, press [MENU] twice. Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right. 2. Move the ShuttlePoint knob to highlight WINDOW SETUP and press [ENT] or move the ShuttlePoint knob to the right. 3. Move the ShuttlePoint knob to highlight CHART PAGE and press [ENT] or move the ShuttlePoint knob to the right. 4. Select the desired window, HIGHWAY or COMPASS, and press [ENT] or move the ShuttlePoint knob to the right. 5. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page. CPV550 Page 65 13.0.1 Addition...