Оценок - 2, средний балл: 4
(
)
)
|
Фото и характеристики Standard Horizon CP180 |
Фрагмент инструкции
If you have a fast moving boat you may want to setup the GPS chart plotter to record a Track point every 0.5NM or if you have a sail boat you may want to setup to lay down a Track point once ever 1 minute. NOTE Please note the Track point memory is 3000 points. This means for a long journey you may have to adjust the time or distance to be able to track your journey. It should be noted when the 3000 Trackpoints are used up, the first Track point layed down will be deleted when a new point is placed on the chart. 1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]. 2. Move the ShuttlePoint knob to highlight TRACK and press [ENT]. 3. Move the ShuttlePoint knob to highlight STEP UNIT and press [ENT] or move the ShuttlePoint knob to the right. 4. Move the ShuttlePoint knob to highlight Dist or Time and press [ENT] or move the ShuttlePoint knob to the right. Figure 10 -Distance Units and Time Units 5. Move the ShuttlePoint knob to highlight DISTANCE or TIME step interval and press [ENT] or move the ShuttlePoint knob to the right. 6. Move the ShuttlePoint knob up/down to the desired step value and press [ENT] or move the ShuttlePoint knob to the right. 7. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 10.0 TRACKING You may have to take a few trips to see how you like the Distance or Time Interval setup on the previous step. However when using the tracking feature you will notice every time a Track Point is layed down on the Chart page a small filled in circle is shown on the Track line. If you move the cursor over the top of the circle a popup window will be shown with the Time, Water Temperature (shown when FF520 is connected), Speed and Course Over Ground (COG) this is very useful if you are fishing and want to review the conditions where the fish were being caught. CP180 / CP180i Page 55 Figure 10.0 - Tracking 10.0.0 Saving and starting a new Track A Track is automatically saved to memory. To start a new Track: 1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT]. 2. Move the ShuttlePoint knob to highlight TRACK and press [ENT]. 3. Move the ShuttlePoint knob to highlight ACTIVE TRACK and press [ENT] or move the ShuttlePoint knob to the right. 4. Move the ShuttlePoint knob up/down to select the next available open Track and press [ENT] or move the ShuttlePoint knob to the right. 5. Move the ShuttlePoint knob to highlight TRACKING and press [ENT] or move the ShuttlePoint knob to the right to set On. 6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown. 7. A new Track now will be laid down. 10.0.1 Other Settings in Track Menu You will notice the Track menu has other selections: TRACKING Allows turning on or off the tracking function ACTIVE TRACK This selection allows you to save a Track to one of the 5 Tracks available VISIBLE Shows or hides a Track shown in ACTIVE TRACK menu LINE COLOR Selects the color of the Track line DELETE Deletes a Track selected in the ACTIVE TRACK menu STEP UNIT Allowable selection are Distance or Time DISTANCE Setup the Distance interval the Track point is placed on the Chart page TIME Setup the TIME interval the Track point is placed on the Chart page 10.1 USING THE TRIP LOG On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized to show TRIP LOG information. 1. Select one of the pages listed above, press and hold [MENU]. You will notice one of the data boxes will be highlighted. 2. Press [ENT] and move the ShuttlePoint knob to highlight TRIP LOG, press [ENT] or move the ShuttlePoint knob to the right. 3. A popup window will be shown with Nm (Nautical Mile), Sm (Statute Mile), Km (Kilometer) and RESET. Move the ShuttlePoint knob to select the desired units of measure and press [ENT] or move the ShuttlePoint knob to the right. Page 56 CP180 / CP180i 4. Press [CLR] or move the ShuttlePoint knob to the right until the selected page (Chart, Navigation, Highway or NMEA Data Page) is shown. 10.1.0 Resetting the Trip Log Select the page with TRIP LOG in one of the data windows as setup in the “Using the TRIP LOG” section. 1. Press and hold [MENU], move the ShuttlePoint knob to highlight TRIP LOG. 2. Press [ENT] or move the ShuttlePoint knob to the right to show a popup window, select RESET and press [ENT] or move the ShuttlePoint knob to the right. 3. A Warning popup window will be shown to confirm if you want to reset the Trip Log. Using the ShuttlePoint knob select YES and press [ENT]. The Trip Log is now reset. CP180 / CP180i Page 57 Page 58CP180 / CP180i 11. USER C-CARD The Optional C-MAP User C-CARD is used to back up Marks, Routes, and Tracks stored in your GPS chart plotter's memory. The User C-CARD is similar to a back up disk used with a PC, in case you have to clear your GPS chart plotter's memory, or if you would like to transfer Waypoint, Track and Route information from one STANDARD HORIZON GPS chart plotter to anothe...
Эта инструкция также подходит к моделям:GPS навигаторы и приемники - CP180i (2.74 mb)