Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Furuno, модель GP-7000F

Производитель: Furuno
Размер: 1.2 mb
Название файла: c5c29876-080a-4465-8400-eb59e0dd2ca2.pdf
Язык инструкции:en
Фото и характеристики  Furuno  GP-7000F
Перейти к скачиванию



Фрагмент инструкции


INSTALLATION ..................................................................................... 1 1.1 Display Unit ..................................................................................................................1 1.2 Antenna Unit.................................................................................................................4 1.3 Transducer ...................................................................................................................5 1.4 Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB.........................18 2. WIRING ................................................................................................ 19 3. ADJUSTMENTS .................................................................................. 26 3.1 Choosing Position Data Source..................................................................................26 3.2 Choosing Port I/O Format...........................................................................................28 3.3 Echo Sounder Settings...............................................................................................30 3.4 Choosing Data Source(s) ...........................................................................................32 3.5 Calibrating NMEA Depth, Speed and Water Temperature Data................................33 3.6 Waypoint, Route Format.............................................................................................34 3.7 External Event Format................................................................................................34 3.8 Primary, Secondary Unit (C-link)................................................................................35 PACKING LIST........................................................................................A-1 OUTLINE DRAWINGS............................................................................. D-1 INTERCONNECTION DIAGRAM ............................................................ S-1 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 Printed in Japan All rights reserved. Pub. No. IME-44291-C1 (HIMA ) GP-7000F The paper used in this manual is elemental chlorine free. .FURUNO Authorized Distributor/Dealer A :AUG.2004 C1:JUN.21, 2007 *00014914012* *00014914012**00014914012* * **00014914012 0001491401200014914012* ** * 0 0 0 1 4 9 1 4 0 1 2 * SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. Turn off the power at the switchboard before beginning the installation. Fire or electrical shock can result if the power is left on. Organic solvent Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. CAUTION Observe the following compass safe distances to prevent interference to a magnetic compass: Display unit Standard Steering compass compass 0.70 m 0.45 m Use the power cable supplied with the installation materials. Use of other power cables may cause fire or damage the equipment. Use the proper fuse. Use of the wrong fuse may damage the equipment. Observe the following precautions when handling the transducer cable: - Keep away from oils. - Choose a working area where the cable will not be damaged during installation. - Do not paint the cable. The sheath of the cable is made of chloroprene (or polyvinyl chloride). Those materials easily deteriorate in the presence of organic solvents (toulene, etc.) found in paints. For that reason keep the cable away from ship's paint house. i SYSTEM CONFIGURATION Speed/Water Temp Sensor (option) Distributor MB-1000* * Required when using 1 kW transducer. Power Source 12-24 VDC : Option : Standard ANTENNA UNIT GPA-017 DISPLAY UNIT GP-7000F NMEA1 and NMEA2 ports: Radar, autopilot, video sounder, temperature indicator, etc. PC/NMEA IN port: PC, NMEA device, buzzer : User Supply TRANSDUCER How to remove the hard cover Place your thumbs at the center of the cover, and then lift the cover while pressing it with your thumbs. ii EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks Display Unit GP-7000F -1 Antenna Unit GPA-017 -1 System also available without antenna (for boats which already have an appropriate antenna) Installation Materials* CP14-06400 000-041-183 1 Signal cable and power cable Accessories* FP20-01100 000-042-239 1 Spare Parts* SP14-03201 004-371-980 1 520-5PSD 000-015-204 Choose one Also available without transducer (for boats with transducer already installed) Transducer 525-5PWD 000-146-966 520-5MSD 000-015-212 Triducer 525ST-MSD 000-015-263 525ST-PWD 000-015-261 *: See list at back of this manual. iii Optional equipment Name Type Code No Qty...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории