Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
For better FM/AM reception Outdoor FM antenna (not supplied) AUX LEFT RIGHT AUDIO OUT VCR, etc. White Red Audio cord (not supplied) To a wall outlet Plug the AC power cord only after all connections are complete. 4 English PUSH OPEN AUTOREVERSE FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna (supplied) Turn it until the best reception is obtained. Red White 5 To assemble and connect the AM loop antenna To connect the AM loop antenna To assemble the AM loop antenna English 1 Hold 2 Insert 3 Release • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception. To connect the speaker cords Make sure the both speakers are connected correctly and firmly. 1 Hold 2 Insert 3 Release When connecting the speaker cords, match the polarity of the speaker terminals: Red cord to (+) and black cord to (–). • DO NOT connect more than one speaker to each terminal. • DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System. 6 Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. English SLEEP 123 REC RANDOM PRGM ALL A.STANDBY MONO ST MP3 REC 123456789RDS ST • While listening to radio: Band Frequency • While selecting “TAPE” or “AUX”: Track number Elapsed playing time • While disc play is stopped: Total track number Total playing time Group number Track number CD: MP3: • While playing a CD/MP3*: Source name * When you start playing an MP3 disc, the group number, track number, track name, (and ID3 Tag) will be shown before the elapsed playing time appears. Indications on the main display 3FM reception indicators • MONO: lights while receiving an FM stereo station in monaural. • ST (stereo): lights while an FM stereo station with sufficient signal strength is tuned in. 4MP3 indicator • Lights when an MP3 track is detected. 5REC indicator • Lights while recording. 6Tape operation indicators • 23 (tape direction): – Lights to indicate the current tape running direction. – Flashes slowly during playback and recording. – Flashes quickly while rewinding a tape. • (reverse mode): – : tape play continues endlessly. – : tape automatically reverses once. – : tape play stops at the end of one side. 7Disc operation indicators • RANDOM: lights when Random Play mode is activated. • PRGM (program): lights when Program Play mode is activated. • (repeat)/ALL: – : lights when One Track Repeat is activated. – ALL : lights when All Track Repeat is activated. 8Main display 9A(auto). STANDBY indicator • Lights when Auto Standby is activated. • Flashes when disc or tape playback stops with Auto Standby activated. 1Rhythm Ax indicator • Lights when Rhythm Ax is activated. 2Timer indicators • : lights when Daily Timer or Recording Timer stands by; flashes while setting or working. • 1/2/3: lights when a Daily Timer (1, 2, or 3) stands by; flashes while setting or working. • REC: lights when the Recording Timer stands by; flashes while setting or working. • SLEEP: lights when the Sleep Timer is activated. 7 EnglishEnglish Daily Operations—Playback 2 1 3 PRESET UP PRESET DOWN GROUP UP GROUP DOWN 4,7,. REV. MODE FM MODE SET 10 keys 2 1 VOLUME STANDBY/ON 3 4 1 Turn on the power. The STANDBY/ON lamp on the main unit lights in green. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source. Playback automatically starts if the selected source is ready to start. • If you press AUX, start playback source on the external component. 3 Adjust the volume. 4 Operate the target source as explained later. To turn off (stand by) the unit STANDBY/ON The STANDBY/ON lamp on the main unit lights in red. • A small amount of power is always consumed even while on standby. For private listening Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting the headphones. • Disconnecting the headphones will activate the speakers again. DO NOT turn off (stand by) the System with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback. 8 EnglishEnglish Listening to the Radio To select the band (FM or AM) FM AM To tune in to a station While FM or AM is selected... Remote control: Main unit: 2 sec. 2 sec. DOWN UP Frequency starts changing on the display. When a station (frequency) with sufficient sig...
Эта инструкция также подходит к моделям:Газовые нагреватели - FS-P400 (1.04 mb)
Газовые нагреватели - SP-UXP400 (1.04 mb)