Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Fig 2. SERVICE, SALES & SUPPORT ACCESSORIES & COMPONENTS INTRODUCTION Cat # Description #480 Studio HD Dolly #483 Studio HD Dolly with Cable Guards and Track Lock #475 Rubber Feet (set of 3) #993 Mid Level Spreader #974 Softcase for HD 100 & HD 150 2-stage P4816 Transport Clip Miller Authorised Service Agents must carry out all service and repair work. Failure to observe this requirement may void warranty. It is advisable to notify Miller or a MIller Authorised Service Agent if a change of performance is observed as a result of dropping or rough usage. For information regarding sales and service of Miller products, or for your nearest Miller representative please contact us via our website or at the following: Thank you for purchasing the HD Tripod. The HD Tripod has been designed to suit payload capacities from ENG up to full configuration EFP cameras. The HD Tripod is available with either a O100 mm or O150 mm bowl and as 1-Stage, 2-Stage, Studio or Mini models. The 2-Stage Tripod comes in ultra- light, high strength carbon fibre tubing while the 1-Stage, Studio and the Mini Tripod comes in anodised alloy tubing. The HD Tripod is designed primarily to give excellent stability and durability. While many integrated features enable the user to operate the Tripod safely and easily – such as the Integrated Carry Handle (O100 mm bowl), Forever-Flat rubber feet and Fine height adjustable Mid-level spreader. The HD Tripod will give best performance when used with the Arrow Fluid Head range and DS-60 Fluid Head. This will ensure maximum system stability to suit any professional set-up. The HD Tripod will suit most industry standard O100 mm O150 mm Fluid Heads as well, please refer to manufacturers’ manual for mounting details. MILLER CAMERA SUPPORT EQUIPMENT 30 Hotham Parade, Artarmon, Sydney NSW 2064 Australia Tel: +61 2 9439 6377 Fax: +61 2 9438 2819 Email: sales@miller.com.au MILLER FLUID HEADS (Europe) LTD. Unit 12A, Shepperton Business Park Govett Avenue, Shepperton Middlesex TW17 8BA United Kingdom Tel: +44 (0)1932 222 888 Fax:+44 (0)1932 222 211 Email: sales@millertripods-europe.com MILLER CAMERA SUPPORT LLC (USA) 218 Little Falls Road, Cedar Grove, New Jersey 07009-1231 USA Tel: (973) 857 8300 Fax: (973) 857 8188 Email: sales@millertripods.us TECHNICAL DATA Cat# 925 931 932 937 943 944 935 945 Tube Configuration 2-Stage 1-Stage Studio 2-Stage 1-Stage Studio Mini Mini Tube Material Carbon Alloy Alloy Carbon Alloy Alloy Alloy Alloy Bowl Dia. mm 100 100 100 150 150 150 100 150 Maximum Load kg (lb) 95 (210) 95 (210) 95 (210) 95 (210) 95 (210) 95 (210) 95 (210) 95 (210) Weight kg (lb) 4.5 (9.9) 5.2 (11.5) 4.7 (10.4) 4.6 (10.2) 5.35 (11.8) 4.8 (10.6) 4.0 (8.8) 4.2 (9.3) Max Height mm (in) 1590 (62.6) 1575 (62.0) 1270 (50.0) 1615 (63.6) 1590 (62.6) 1280 (50.4) 960 (37.8) 970 (38.2) Min Height mm (in) 480 (18.9) 785 (30.9) 590 (23.2) 510 (20.1) 800 (31.5) 610 (24.0) 350 (13.8) 370 (14.6) Transport Length mm (in) 750 (29.5) 930 (36.6) 782 (30.8) 750 (29.5) 940 (37.0) 790 (31.1) 645 (25.4) 650 (25.6) WARRANTY WEBSITE Please refer to warranty card for complete details D4892-6 TRIPOD SET-UP LEG LOCK ADJUSTMENT LEG TO BOWL ADJUSTMENT TRANSPORT CLIPS The leg to bowl pivot joint on the HD tripod should have no lateral or free play movement and should swing with a firm, smooth resistance. Adjustment is usually not required, however, should it become necessary, the following procedure must be observed. (Fig 6.) Leg to Bowl Adjustment to eliminate lateral, or free play movement: 1. Using a cross head screwdriver, ensure Bracket Mounting Screws on both sides of the Leg Top Bracket are tight. Retighten if necessary. Check all legs. Leg pivot or ‘swing’ adjustment to ensure firm, smooth resistance. 2. Tighten the Leg Pivot Screws on each side of the Leg Top Bracket using a 4mm allen key until a smooth resistance is maintained. Check all legs. 1. Before setting-up the tripod, the Mid Level Spreader must be attached. 2. Remove tripod from the Softcase and unclip the Transport Clips. 3. Place the Tripod Feet on level surface (if possible) and release the Quik Lok Upper Lever on each leg. 4. Lift the top of the tripod to a desired height and then apply the Quik Lok Upper Lever on each leg. 5. Release the Quik Lok Lower Lever on each leg (2-Stage model), then lift the tripod to a desired height and apply the Quik Lok Lower Lever on each leg. 6. Spread the Tripod Legs apart, check that the Tripod Bowl is approximately level to the ground. 7. Check that the tripod is secure. Over time the leg locks may need adjusting to prevent leg slippage. Adjust the Upper Leg Lock Assembly in a locked position using 13mm Socket. (Fig 5.) Extend the upper stage half way and lock the Upper Lever.1. Turn the Upper Leg lock adjuster clockwise 1/8th of a turn. Release 2. Quik Lok Upper Lever and ensure that stage slides freely. When adjusted correctly Leg Lock Lever should only have a small 3. amount of “free play” before locking ...