Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
7. Log placement is completed. Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may adversely affect performance of the heater. WARNING: All previously applied loose material must be removed prior to reapplication. Replacement Loose Material (glowing embers) Part Number LS-18FA(C, O, S) 15999 LS-24FA(C, O, S) 15970 LS-30FA(C, O, S) 15970 Log Placement LS-(18, 24, 30)FA(C,O,S) Logs Figure 1 Attention: Do not use Figure 1 to order replacement logs. Refer to Page 8 Parts List and Parts View to order logs for your appropriate model number. Attention: Use the following procedure to connect ON/OFF switch or remote receiver to VFSR burner assembly. Remove ON/OFF switch from switch log assembly. Install ON/ OFF switch into switch bracket. Connect the 2-1/4" terminals onto the TH and TH/TP terminals on valve. Place switch bracket to right of the gas valve and burner assembly. When connecting to remote receiver, cut off 1/4" terminals from wires attached to ON/ OFF switch. Strip wires back about 1/4". Connect stripped ends into remote receiver. The following WARNING applies when log set is installed onto an unvented gas burner assembly. WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted. Page 4 15997-0-0903 Do not cover any large rear ports with LS-18FA(C,O,S)-1 PHOTOS Photo 4Photo 3Photo 1 Photo 2loose material (glowing embers). 15997-0-0903 Page 5 Page 6 15997-0-0903 LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). Page 715997-0-0903 LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). PARTS LIST & PARTS VIEW PARTS LIST & PARTS VIEW Attention: When ordering parts, it is very important that part number and description of part coincide. Index PartIndex Part No. Number Description No. Number Description FLAME ART LOGS 4 R-5995 30" BACK RIGHT-SUMMER SAND 1 R-5962 18" FRONT-SUMMER SAND 4 R-6001 30" BACK RIGHT-OCEAN BREEZE 1 R-5968 18" FRONT-OCEAN BREEZE 4 R-6007 30" BACK RIGHT-CORAL JEWEL 1 R-5974 18" FRONT-CORAL JEWEL 5 R-5958 18" BACK LEFT-SUMMER SAND 1 R-5980 24" FRONT-SUMMER SAND 5 R-5964 18" BACK LEFT-OCEAN BREEZE 1 R-5986 24" FRONT-OCEAN BREEZE 5 R-5970 18" BACK LEFT-CORAL JEWEL 1 R-5992 24" FRONT-CORAL JEWEL 5 R-5976 24" BACK LEFT-SUMMER SAND 1 R-5998 30" FRONT-SUMMER SAND 5 R-5982 24" BACK LEFT-OCEAN BREEZE 1 R-6004 30" FRONT-OCEAN BREEZE 5 R-5988 24" BACK LEFT-CORAL JEWEL 1 R-6010 30" FRONT-CORAL JEWEL 5 R-5...
Эта инструкция также подходит к моделям:Газовые нагреватели - LS-18FAC-1 (422.53 kb)
Газовые нагреватели - LS-18FAS-1 (422.53 kb)
Газовые нагреватели - LS-24FAO-1 (422.53 kb)
Газовые нагреватели - LS-24FAS-1 (422.53 kb)