Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
22 FUSE CHECK/REPLACEMENT/RESET....................................................................................................................................... 23 TROUBLESHOOTING ................................................................................................................................................... 24 SCRAPPING .................................................................................................................................................................. 24 SR 1100S B 146 2494 000(2)2007-02 A 1 USER MANUAL ENGLISH INTRODUCTION NOTE The numbers in brackets refer to the components shown in Machine Description chapter. MANUAL PURPOSE AND CONTENTS The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact Nilfisk-Advance in case of doubts regarding the interpretation of the instructions and for any further information. TARGET This Manual is intended for operators and technicians qualified to perform the machine maintenance. The operators must not carry out procedures reserved for qualified technicians. Nilfisk-Advance will not be answerable for damages coming from the non-observance of this prohibition. HOW TO KEEP THIS MANUAL The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause damage to it. DECLARATION OF CONFORMITY The Declaration of Conformity, supplied with the machine, certifies the machine conformity with the law in force. NOTE Two copies of the original Declaration of Conformity are provided together with the machine documentation. IDENTIFICATION DATA The machine model and serial number are marked on the plate (37). The machine model year is written in the EC Declaration of Conformity and it is also indicated by the first two figures of the machine serial number. This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data. MACHINE model ............................................................................... MACHINE serial number ................................................................... 2 146 2494 000(2)2007-02 A SR 1100S B USER MANUAL ENGLISH OTHER REFERENCE MANUALS Other manuals supplied with the machine: – Electronic Battery Charger Manual (if equipped), to be considered an integral part of this Manual – Sweeper Spare Parts List Other available manuals: – Service Manual (that can be consulted at Nilfisk-Advance Service Centers) SPARE PARTS AND MAINTENANCE All necessary operating, maintenance and repair procedures must be carried out by qualified personnel or by Nilfisk-Advance Service Centers. Only original spare parts and accessories must be used. Contact Nilfisk-Advance for service or to order spare parts and accessories, specifying the machine model and serial number. CHANGES AND IMPROVEMENTS Nilfisk-Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such benefits to the machines that were previously sold. Any change and/or addition of accessory must be approved and performed by Nilfisk-Advance. OPERATION CAPABILITIES This sweeper has been designed and built to clean/sweep smooth and solid floors, and to collect dust and light debris, in civil and industrial environments, under safe operation conditions by a qualified operator. CONVENTIONS Forward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to say on the driver’s seat (25). UNPACKING/DELIVERY To unpack the machine carefully follow the instructions on the packing. Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim. Check that the machine is equipped with the following features: – Technical documents: • Sweeper User Manual • Electronic Battery Charger Manual (if equipped) • Sweeper Spare Parts List – No. 1 70 A fuse – No. 1 external battery charger connector (if the machine is not equipped with on board battery charger) SR 1100S B 146 2494 000(2)2007-02 A 3 USER MANUAL ENGLISH SAFETY The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary precautions to safeguard people and property. The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total cooperation of the person responsible for the machine operation. Most of the accidents that may o...