|
Фрагмент инструкции
1. Adjust height of vacuum inlet. For maximum debris pickup, inlet should be as close to debris as possible without blocking airflow and engine speed set to “FAST”. 2. Inspect debris bag. It must be properly attached to machine, in good condition, clean and dry with the top zipper fully closed. Make sure that the accessory plug is installed into front hole in vacuum nozzle. 3. Start engine. Not all debris pickup will require that the engine speed be set to “FAST”. You can experiment with vacuum inlet height and engine speed to best suit your conditions. 4. Operating in dry dusty conditions may require that the engine be set to the “SLOW” position. The debris bag can quickly become plugged with fine dust, reducing vacuum action. A zippered vent flap has been provided on the side of the bag. It can be opened to improve airflow. DO NOT open top zipper when engine is running. 5. For peak performance, keep debris bag clean and do not overfill. The bag must be completely dry before use. WARNING DO NOT remove bag adapter from machine or open debris bag with engine running. STOP engine and allow all rotation to stop. 6. If the vacuum inlet or discharge becomes plugged, STOP ENGINE. Engine must come to a complete stop before removing debris bag or attempting to remove plug from inlet area. To avoid accidental starting, always remove the sparkplug wire from the sparkplug and secure away from sparkplug. When possible use a stick to remove the plug. If that does not work, and hands must be used, wear heavy gloves. The debris could contain sharp items. WARNING DO NOT vacuum any debris that is burning, wet, flammable, explosive, or poisonous. DO NOT store with debris in the bag. Decaying organic debris generates heat that could damage the bag or result in a fire. 2.3 VACUUM HOSE KIT (Optional Accessory) A vacuum hose kit is available that plugs into the front of the Yard Vacuum. The hose allows easy access for hard to reach places. Contact your authorized dealer for information. 9 Section 3 – MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. 3.1 INTRODUCTION To retain the quality of the Yard Vacuum, use genuine replacement parts obtained only through your authorized dealer. Contact a local authorized dealer for parts and service assistance. For the correct part or information for a particular Yard Vacuum, always mention the model/part number and serial number. We recommend returning the Yard Vacuum to an authorized dealer annually for inspection and addition of any new devices, which might upgrade the safety of the machine. For the nearest authorized dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the heading, ENGINES - gasoline. 3.2 SERVICE - AFTER FIRST 5 HOURS Routine maintenance is important to the performance and life of your Yard Vacuum. Service performed properly and at the recommended interval is essential. Refer to Section “MAINTENANCE SCHEDULE” in this manual and in the Engine Owner’s Manual. Carefully complete all of the recommended service procedures. 3.2.1. CHANGE ENGINE OIL The design of the machine restricts access to the oil drain plug on some model engines. The quickest and cleanest method to drain the oil is to tip the machine on its side, remove the dip stick, and allow the oil to drain into a pan. Refer to the Engine Owners Manual for recommended oil change interval and oil specifications. 3.2.2. SERVICE ENGINE AIR CLEANER The engine is equipped with a dual element air cleaner. Both the foam pre-cleaner and cartridge require service. Refer to Engine Owner’s Manual for recommended service procedures. 3.2.3 INSPECT MACHINE Carefully inspect entire machine for loose, missing, damaged or worn parts. Run the machine and check for unusual noise or vibration. After stopping engine, open top of debris bag and inspect the interior of the bag and the discharge deflector end of the bag adapter. Repair or replace debris bag, bag adapter, and machine as necessary before operating. Contact your authorized dealer for assistance. 3.3 SERVICE – EVERY 25 HOURS Refer to Section “MAINTENANCE SCHEDULE” in this manual and in the Engine Owner’s Manual. Carefully complete all of the recommended service procedures. 3.4 STORAGE – OUT OF SEASON DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building. Refer to Sections “Safe Handling of Fuel” and “Maintenance and Storage”, pages 2-3. 1. Thoroughly clean entire machine, eng...
Эта инструкция также подходит к моделям:Газоноуборщики - SV25550HV, ESV25650B, SV25650B (437.73 kb)
Газоноуборщики - SV25650B, ESV25650B, SV25550HV (437.73 kb)