Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Remove the extension tube from the sweeper power head. 2. Turn sweeper power head upside down being careful Notto accidentally turn the unit ON. 3. Remove the transparent brush cover. (Fig. 1) (Refer to your owner's manual for detailed instructions.) 4. Push in on the locking tab of the gear box and lift gear box to remove. (Fig. 2 & Fig. 3) 5. Lift the brush bar end cap up from the slot. ( Fig. 4) 6. Lift the brush bar out from the bushing and slip of the belt to remove the brush bar. (Fig. 5) 7. Insert the new brush bar by first inserting the brush bar into the bushing on the end opposite the driver belt. (Fig. 5) 8. Slip the belt over the brush bar cap. 9. Insert the brush bar into the slot. ( Fig. 4) 10. Insert the gear box tabs into the tab slots and push down until it clicks into place. 11. To remove the squeegee, follow instructions above for removing the gear box and pull the squeegee out from the clips. ( Fig. 6) To replace the squeegee, press the new one back into the clips. Fig. 4 Fig. 5 Fig. 1 Fig. 3 Fig. 6 Style # XSY1730 for Model V1730 Sweeper Service Pack Contains: 1 Replacement Brush Roll 1 Squeegee 1 Gear Box With Side Sweeper 1 Battery Pack 8.4V dc Changing the Rotating Brush, Gear Box & Squeegee WARNING: Use caution when changing the rotating brush, gear box and squeegee so that the unit does not turn ON when pressing down on the sweper power head. 1. Remove the extension tube from the sweeper power head. 2. Turn sweeper power head upside down being careful Notto accidentally turn the unit ON. 3. Remove the transparent brush cover. (Fig. 1) (Refer to your owner's manual for detailed instructions.) 4. Push in on the locking tab of the gear box and lift gear box to remove. (Fig. 2 & Fig. 3) 5. Lift the brush bar end cap up from the slot. ( Fig. 4) 6. Lift the brush bar out from the bushing and slip of the belt to remove the brush bar. (Fig. 5) 7. Insert the new brush bar by first inserting the brush bar into the bushing on the end opposite the driver belt. (Fig. 5) 8. Slip the belt over the brush bar cap. 9. Insert the brush bar into the slot. ( Fig. 4) 10. Insert the gear box tabs into the tab slots and push down until it clicks into place. 11. To remove the squeegee, follow instructions above for removing the gear box and pull the squeegee out from the clips. ( Fig. 6) To replace the squeegee, press the new one back into the clips. Fig. 4 Fig. 5 Fig. 1 Fig. 3 Fig. 6 Lift Gear box tabsLocking tabGear boxFig. 2 Lift Gear box tabsLocking tabGear boxFig. 2 For information or assistance: EURO- PRO Operating LLC 94 Main Mill Rd., Door 16 Platsburgh, N. Y 12901 Tel: 1 ( 800) 798- 7398 BATTERY REMOVAL & DISPOSAL NOTE : If uncertain as to how to remove your battery pack, we suggest you take your sweeper to a reputable small appliance service technician to have this service performed. Follow these steps when battery removal is required. This sweeper is equipped with Ni-Cdbatteries and you need to dispose of them properly. When the batteries are no longer good foruse, they must be removed from the sweeper for disposal. Do not remove the batteries for any reason other than disposal of them. Call your nearest recycling center for information on the recycling and disposal of Ni-Cdbatteries. WARNING: You must nevr use ordinary bateries for replacement as these may leak and cause damage. REMOVAL & REPLACEMENT OF BATTERY PACK Rev. 11/04 Printed in Turkey THIRTY ( 30) DAYLIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of thirty (30) days from the date of the original purchase, when utilized for normal household use, subject to the followingconditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete accessory kit, freight prepaid to: In US: EURO-PROOperating LLC: 94 Main Mil Rd., Door 16, Plattsburgh, N.Y. 12901 In Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC, H4S 1A7 If the appliance is found by EURO-PROto be defective in material or workmanship, EURO-PROwill repair or replace it free of charge. Proof of purchase date and $ 6.95 to cover the cost of return shipping and handling must be included. * Non-durable parts including, without limitation brushes, squeegees, which normally require replacement are specifically excluded from waranty. The liability of EURO-PROCorporation is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for comercial purposes. This limited warranty doesnot cover damage caused by misuse, abuse, negligent handling or damage due to faulty packagin or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any ...