Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Nos. 2690443 & 16948991 MOWER DEFLECTOR INSTALLATION A WARNING Before beginning any service work turn off the PTOj set the parking brake, turn off the ignition, and disconnect the spark plug wire(s). The mower deflector is attached to the deck in its shipping position. Be sure to install it in operating position as shown in the illustration. 1. Remove and retain the hardware securing the deflector to the mower deck. Secure the rear of the rod to the deck using the original hardware. 2. Install the deflector spring in the center defector notch. 3. Install the deflector, spring, 3/8 washer, and rod clamp on the rod. 4. Wind the spring 1/2 turn to that the legs will force the deflector down into the operating position, and secure the nod clamp with the original hardware. 1/4-20 1/4-20 x 1-1/2 1/4-20 © 1/4 1/4 1/4-20 x 1-1/2 Simplicity MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, Wl 53074-0997 USA Rev. 1/2006 © 2005 Simplicity Manufacturing, Inc. All Rights Reserved MB 2006-1...
Эта инструкция также подходит к моделям:Газонокосилки - 2690443 (526.21 kb)