Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Common sense, caution and care must be exercised when installing, maintaining, or operating the washer. Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information WARNING This machine must be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with theconstruction and operation of this type of machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment damage, and may void the warranty. SW004 CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 IMPORTANT: Ensure that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked. WARNING Install the machine on a level floor of sufficient strength. Failure to do so may result in conditions which can produce serious injury, death and/or property damage. W703 Safety Decals Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the operator or service technician. To provide personal safety and keep the machine in proper working order, follow all maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer immediately. Use manufacturer-authorized spare parts to avoid safety hazards. WARNING Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam must be turned off and the pipe, connections, and components allowed to cool before the pipe can be touched. SW014 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Safety Information Operator Safety Do not bypass any safety devices in the machine. WARNING NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury. SW012 WARNING Operating the machine with severe out-ofbalance loads could result in personal injury and serious equipment damage. W728 To ensure the safety of machine operators, the following maintenance checks must be performed daily: 1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. Make certain that spares are available. 2. Check door interlock before starting operation of the machine: a. Attempt to start the machine with the door open. The machine should not start with the door open. b. Close the door and start the machine. The machine should not start with the door unlocked. c. Attempt to open the door while the cycle is in progress. The door should not open. If the door lock and interlock are not functioning properly, disconnect power and call a service technician. 3. Do not attempt to operate the machine if any of the following conditions are present: a. The door does not remain securely locked during the entire cycle. b. Excessively high water level is evident. c. Machine is not connected to a properly grounded circuit. F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction Model Identification Information in this manual is applicable to these models: Model HCD020GD2 HCN020KD2 HCZ020GN2 SCN020JYF SCU202HN2 SCU020LEV HCD020JD2 HCN020KDV HCZ020HN2 SCN020JYV SCU020HNF SCU020LX2 HCD020LD2 HCN020KDV SCL020GC2 SCN020KN2 SCU020JC2 SCU020LXV HCL020GD2 HCN020KEF SCL020GN2 SCN020KNF SCU020JCF SCU020LY2 HCL020GN2 HCN020KEV SCL020HN2 SCN020LC2 SCU020JCV SCU020LYV HCL020HDF HCN020KY2 SCL020HNF SCN020LCF SCU020JD2 SCU020WC2 HCL020HN2 HCN020KYF SCL020JC2 SCN020LCV SCU020JDF SCU020WCV HCL020KD2 HCN020KYV SCL020JD2 SCN020LD2 SCU020JDV SCU020WD2 HCL020KDF HCU020GC2 SCL020JDF SCN020LX2 SCU020JE2 SCU020WDV HCL020KDV HCU020GD2 SCL020JE2 SCN020LY2 SCU020JEF SCU020WE2 HCL020LD2 HCU020GE2 SCL020JEF SCN020LYF SCU020JEV SCU020WEV HCN020GC2 HCU020GL2 SCL020JX2 SCN020LYV SCU020JL2 SCU020WX2ND HCN020GD2 HCU020GN2 SCN020GC2 SCN020WC2 SCU020JLF SCU020WXV POUHCN020GE2 HCU020GX2 SCN020GD2 SCN020WCF SCU020JLV SCU020WY2 20HCN020GN2 HCU020GY2 SCN020GE2 SCN020WCV SCU020JX2 SCU020WYV HCN020GX2 HCU020HC2 SCN020GN2 SCN020WD2 SCU020JXF UCL020GN2 HCN020GY2 HCU020HN2 SCN020GX2 SCN020WDV SCU020JXV UCL020HN2 HCN020HC2 HCU020HNF SCN020GY2 SCN020WY2 SCU020JY2 UCL020KN2 HCN020HCF HCU020HX2 SCN020HN2 SCN020WYF SCU020JYF UCN020GN2 HCN020HD2 HCU020KCF SCN020HNF SCN020WYV SCU020JYV UCN020HN2 HCN020HN2 HCU020KCV SCN020JC2 SCU020GC2 SCU020KN2 UCN020HNF HCN020HNF HCU020KE2 SCN020JCF SCU020GD2 SCU020KNF UCN020KN2 HCN020HY2 HCU020KEV SCN020JCV SCU020GE2 SCU020LC2 UCU020GN2 HCN020HYF HCU020KL2 SCN020JD2 SCU020GL2 SCU020LCV UCU020HN2 HCN020KC2 HCU020KY2 SCN020JEF SCU020GN2 S...
Эта инструкция также подходит к моделям:Газонокосилки - CHM1772C (809.13 kb)
Газонокосилки - CHM1772C (809.13 kb)
Газонокосилки - CHM1772C (809.13 kb)
Газонокосилки - CHM1772C (809.13 kb)