Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
– Never mow by pulling the mower towards you. Stop the blades if the lawnmower has to be tilted for transportation when crossing surfaces other than grass and when transporting the lawnmower to and from the area to be mowed. Do not tilt the machine when starting or switching on the motor, except if the machine has to be tilted for starting in long grass. In this case, do not tilt it more than absolutely necessary and tilt only the part which is away from the operator. Always ensure that both hands are in the operating position before returning the machine to the ground. Switch on the lawnmower with feet well away from the blades. Do not tilt the mower when starting. Do not put hands or feet near or under rotating parts. Never operate the lawnmower without the grassbox/bag or deflector guard in position. Never pick up or carry the lawnmower while the motor is running. Be careful during adjustment of the lawnmower to prevent entrapment of the feet and hands between moving blades and fixed parts of the lawnmower. Remove the plug from the socket: – whenever you leave the machine – before clearing a blockage – before checking, cleaning or working on the lawnmower – after striking a foreign object. Inspect the lawnmower for damage and make repairs as necessary – if the lawnmower starts to vibrate abnormally (check immediately). Keep all nuts, bolts and screws tight to be sure that the lawnmower is in safe working condition. Check the grassbox/bag frequently for wear or deterioration. Replace worn or damaged parts for safety. Ensure replacement parts fitted are Bosch approved. 13 • F016 L69 839 • TMS • 05.02.02 English - 1 GB • Printed in England • BA F 016 L69 839 • QX elctric • OSW 02.02 F016 L69 839.book Seite 2 Freitag, 22. Februar 2002 10:04 10 Product Specification Cylinder Mower CLASSIC CLASSIC CLASSIC WINDSOR 12 S WINDSOR 14 S ELECTRIC 30 ELECTRIC 30 S ELECTRIC 35 S Part number F016 313 4.. F016 313 5.. F016 313 6.. F016 302 5.. F016 314 1.. Rated power 340 W 340 W 340 W 340 W 340 W Blade width 30 cm 30 cm 35 cm 30 cm 35 cm Height of cut 10–35 mm 10–35 mm 10–35 mm 10–35 mm 10–35 mm Grassbox capacity 32 l 32 l 32 l 32 l 32 l Self Propelled – • • • • Rake –––• • Weight 23.5 kg 24.5 kg 27 kg 24.5 kg 28 kg Protection class / II / II / II / II / II Serial Number See serial No 9 (rating plate) on machine Intended Use Operating Controls This product is intended for domestic lawn mowing. Introduction This manual gives instructions on the correct assembly and safe use of your machine. It is important that you read these instructions carefully. When fully assembled the machine weighs approximately 23.5 – 28 kg. If necessary, obtain assistance to remove from packaging. Take care when carrying the mower to the lawn, as the blades are sharp. Delivered Items Carefully remove the machine from its packaging and check that you have all the following items: – Lawnmower with handle assembly – Handle spindle – Wing nuts – Grassbox – Operating instructions When parts are missing or damaged, please contact your dealer. 1 Handlebar 2 Switch lever 3 Safety button 4 Handle bottom 5 Grassbox 6 Cable restraint** 7 Mains plug** 8 Ventilation slots 9 Serial Number 10 Height of cut knob **Country specific Not all of the accessories illustrated or described are included as standard delivery. 14 • F016 L69 839 • TMS • 05.02.02 English - 2 GB • Printed in England • BA F 016 L69 839 • QX elctric • OSW 02.02 F016 L69 839.book Seite 3 Freitag, 22. Februar 2002 10:04 10 For Your Safety Warning! Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, damaged or entangled. The blades continue to rotate for a few sec- onds after the machine is switched off. Caution - do not touch rotating blades. Electrical Safety Your machine is double insulated for safety and requires no earth connection. The operating voltage is 230 V AC, 50 Hz. Only use approved extension cables. Contact your service agent for details. Extension cords/leads should only be used if they comply with H05VV-F or H05RN-F types. It is recommended for increased electrical safety to use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it. For products not sold in GB: WARNING: For safety, it is essential that the mains plug 7 attached to the machine is fitted to the power supply cable 31. The couplings of connection leads must be protected against splashes and the coupling sockets on the leads must be made of rubber or coated with rubber. Fixing means for the connection leads must be used. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. If the supply cord is damaged, it must be replaced by a Bosch Service Center. Products sold in GB only: Your mower is fitted with an approved 13 A (BS 1363/A) electric plug and is protected by a 13 A fuse (ASTA Approved to BS 1362). If the fitted plug is not suitable for your sock...