Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Craftsman, модель 944.511573

Производитель: Craftsman
Размер: 404.77 kb
Название файла: 10c9b75f-a710-469e-9ea8-bca568ebf51d.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Unplugthepower theunitfrom sourcenotinuse,servic whenbefore ing,andwhenaccessories changing and/or attachments. • Avoidanybodywithany contact groundedsuch conductor,asmetal fences,orpipes,toavoidthepossi bilityofelectric shock. • GroundFaultCircuitInterrupter (GFCI)should protectionbepro videdonthecircuitoroutlettobe usedforthepowerhead. Recep taclesarehaving availablebuilt-in GFCIprotectionbeused andmay forthismeasure ofsafety. UNIT/MAINTENANCE SAFETY '_WARNING: Disconnect power- head spark plug (or disconnect power- head from power source) before performing maintenance. • Inspect entire unit before each use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and securely fastened. • Maintain unit according to recommended procedures. • Throw away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit. • Use only recommended Craftsman parts and accessories. Never use wire, wire rope, string, flailing devices, etc. • Be sure blade stops turning when engine idles (see OARBURETOR ADJUSTMENTS section of powerhead manual). • Remove the blade before making carburetor adjustments. Hold the unit by hand. Do not make carburetor adjustments from the blade side of the unit. • Keep others away when making carburetor adjustments. • Never start the unit with the clutch housing removed. The clutch can fly off and cause serious injury. • Have all maintenance and service not explained in this manual performed by a Sears Service Centre. • If blade strikes a foreign object, follow these steps: stop unit and disconnect spark plug wire (or disconnect from power source), inspect for damage, and repair any damage before resuming operation of the unit= EDGING SAFETY _,WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by the blade or can wrap around the shaft. • Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop the unit immediately if you are approached. • Hold the unit firmly with both hands. • Keep firm footing and balance. Do not overreach or stand on unstable surfaces. • Always keep the wheel in contact with the ground= & t Safety Boots Glasses _, Blades move Allow blades to stop _IL momentarily before removing them u after the trigger is ,_ f Instruction Manual f Safety Decals WARNING: Blades can throw objectsviolently. • You can be blinded or injured. • Wear safety glasses and boots. WARNING: Hazard zone for thrown objects • Blades can throw objects violently. • Others can be blinded or injured. • Keep people and animals 50 feet (15 m) away. WARNING: Blades move momentarily after the trigger is released, • The blades can seriously cut you or others, • Allow blades to stop before removing them from the cut. WARNING: Read Instruction Manual • Follow all warnings and instructions. • Failure to do so can result in serious injury. • Keep all parts of your body away from the blade and muffler. • Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc. • Do not force the unit. Use only for jobs explained in this manual. Use only for edging. Do not abuse unit. Do not use in rain or wet locations. • To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the attachment. • Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging. • Never operate without blade shield in place and in good working order. TRANSPORTING AND STORAGE • Do not grasp or hold exposed blade. • Stop powerhead before leaving work area. • Allow powerhead and gearbox to cool before storing or transporting it in a vehicle. • Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. • Store attachment so blade cannot accidentally cause injury. • Store attachment indoors, out of reach of children. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your Sears Service Centre. SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to cir culation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti- vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor ...

Эта инструкция также подходит к моделям:
Газонокосилки - C944.511573 (404.77 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории